BX950UI Features

APC Back‎-UPS 950VA‎,‎ 230V‎,‎ AVR‎,‎ IEC Sockets

• Automatic restart of loads after UPS shutdown‎:‎ Automatically starts up the connected equipment upon the return of utility power‎.‎
• Automatic self‎-test‎:‎ Periodic battery self‎-test ensures early detection of a battery that needs to be replaced‎.‎
• Automatic Voltage Regulation ‎(‎AVR‎)‎‎:‎ Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment‎.‎
• Resettable circuit breaker‎:‎ Easy recovery from overloads‎;‎ no need to replace a fuse‎.‎
• Telephone dataline surge protection‎:‎ Provides protection of connected equipment from power surges traveling on telephone lines‎.‎
• USB connection‎:‎ Use your PC to access additional power protection and management features for your UPS via a USB Port‎.‎

Back‎-UPS Features & Benefits

Protection

• Battery and surge protected outlets‎:‎ Back up and protect your hardware and data during power outages‎,‎ surges and spikes‎.‎
• Surge only outlets‎:‎ Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage‎.‎

Availability

• Automatic self‎-test‎:‎ Periodic battery self‎-test ensures early detection of a battery that needs to be replaced‎.‎
• Battery failure notification‎:‎ Provides early‎-warning fault analysis on batteries enabling timely preventive maintenance
• Intelligent battery management‎:‎ Maximizes battery performance‎,‎ life‎,‎ and reliability through intelligent‎,‎ precision charging‎.‎

Manageability

• Audible alarms‎:‎ Provides notification of changing utility power and UPS power conditions
• LED status display‎:‎ Quickly understand unit and power status with visual indicators‎.‎

Safety

• Safety‎-agency approved‎:‎ Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment‎.‎

Marketing Features

• Battery‎-protected and surge‎-only outlets‎:‎ Reserves power capacity and run time for connected equipment that require UPS battery back‎-up while providing surge only protection for less critical equipment

Technical Specifications‎:‎

• Output power capacity‎:‎ 480Watts / 950VA
• Max Configurable Power ‎(‎Watts‎)‎‎:‎ 480Watts / 950VA
• Nominal Output Voltage‎:‎ 230V
• Output Frequency ‎(‎sync to mains‎)‎‎:‎ 50/60 Hz +/‎-1 Hz
• Output Frequency ‎(‎not synced‎)‎‎:‎ 50/60 Hz +/‎-1 Hz
• Topology‎:‎ Line Interactive
• Waveform type‎:‎ Stepped approximation to a sinewave
• Output Connections‎:‎ ‎(‎1‎)‎ IEC Jumpers ‎(‎Battery Backup‎)‎‎,‎ ‎(‎6‎)‎ IEC 320 C13 ‎(‎Battery Backup‎)‎
• Transfer Time‎:‎ 8ms typical ‎:‎ 10ms maximum

• Nominal Input Voltage‎:‎ 230V
• Input frequency‎:‎ 50/60 Hz +/‎- 3 Hz ‎(‎auto sensing‎)‎
• Input Connections‎:‎ IEC‎-320 C14
• Cord Length‎:‎ 1.22meters
• Input voltage range for main operations‎:‎ 150 ‎- 280 V
• Type of Input Protection Required‎:‎ 3‎-pole breaker
• Maximum Input Current‎:‎ 4.0 A

• Battery type‎:‎ Maintenance‎-free sealed Lead‎-Acid battery with suspended electrolyte ‎:‎ leakproof
• Typical recharge time‎:‎ 8 hour‎(‎s‎)‎
• Expected Battery Life ‎(‎years‎)‎‎:‎ 2 ‎- 5
• Battery Volt‎-Amp‎-Hour Capacity‎:‎ 76

• Interface Port‎(‎s‎)‎‎:‎ USB
• Control panel‎:‎ LED Status display with On Line ‎:‎ On Battery
• Audible Alarm‎:‎ Alarm when on battery‎:‎ distinctive low battery alarm ‎:‎ overload continuous tone alarm

• Surge energy rating‎:‎ 273 Joules
• Data Line Protection‎:‎ RJ‎-11 Modem/Fax protection

• Maximum Height‎:‎ 215 mm ‎,‎ 21.5 CM
• Maximum Width‎:‎ 130 mm ‎,‎ 13.0 CM
• Maximum Depth‎:‎ 336 mm ‎,‎ 33.6 CM
• Net Weight‎:‎ 8.0 KG
• Shipping weight‎:‎ 8.99kg