BX950UI Features

APC Back-UPS 950VA, 230V, AVR, IEC Sockets

• Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
• Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
• Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
• USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.

Back-UPS Features & Benefits

Protection

• Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
• Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Manageability

• Audible alarms: Provides notification of changing utility power and UPS power conditions
• LED status display: Quickly understand unit and power status with visual indicators.

Safety

• Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Marketing Features

• Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Technical Specifications:

• Output power capacity: 480Watts / 950VA
• Max Configurable Power (Watts): 480Watts / 950VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
• Output Frequency (not synced): 50/60 Hz +/-1 Hz
• Topology: Line Interactive
• Waveform type: Stepped approximation to a sinewave
• Output Connections: (1) IEC Jumpers (Battery Backup), (6) IEC 320 C13 (Battery Backup)
• Transfer Time: 8ms typical : 10ms maximum

• Nominal Input Voltage: 230V
• Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Cord Length: 1.22meters
• Input voltage range for main operations: 150 - 280 V
• Type of Input Protection Required: 3-pole breaker
• Maximum Input Current: 4.0 A

• Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 8 hour(s)
• Expected Battery Life (years): 2 - 5
• Battery Volt-Amp-Hour Capacity: 76

• Interface Port(s): USB
• Control panel: LED Status display with On Line : On Battery
• Audible Alarm: Alarm when on battery: distinctive low battery alarm : overload continuous tone alarm

• Surge energy rating: 273 Joules
• Data Line Protection: RJ-11 Modem/Fax protection

• Maximum Height: 215 mm , 21.5 CM
• Maximum Width: 130 mm , 13.0 CM
• Maximum Depth: 336 mm , 33.6 CM
• Net Weight: 8.0 KG
• Shipping weight: 8.99kg