Search TransOurDream Discover More Transfer Papers

IRON

1 Set Iron to High Temperature (like Cotton/Jeans Setting) and TURN OFF steam.

2 Apply FIRM, EVEN and HEAVY pressure and iron each area of the image for 5 seconds. Circularly press and iron the image for 5 minutes in total.

3 Ensure that all areas of the image is ironed, especially the corners and edges.

NOTES:

Apply ENOUGH pressure on the transfer as more pressure will help transfer all of the print onto the fabric.

INSUFFICIENT PRESSURE and IRONING TIME would achieve poor transfer result - the transferred image may peel off.

EASY PRESS

Temperature and Time may vary based on easy heat press type and image size. Suggest you do a test before transfer onto t-shirts. For 8.5x11 size or A4 image, set temperature to 170℃(338℉) and time to 120 seconds.

1 At first, heat press the whole image slowly from one side to the other side.

2 Apply HEAVY pressure on each area of the image for 10 seconds, circularly iron the whole image 4 times (80 seconds in total).

3 At last, heat press each corner of the image for 10~20 seconds. NOTES: If the corner peels off, cover the teflon paper (in the pack) and heat press it for another 10~20 seconds.

HEAT PRESS MACHINE

Set Temperature to 170℃(338°F). Set Time to 10 seconds.  Apply MEDIUM pressure.

Step 1: PRINT

Print your design on the BLANK Side of transfer paper.

Before Printing: Set Paper Type to Plain Paper or Photo Paper. Set Printing Quality to Photo or High Quality Photo. No MIRROR Printing.

NOTES: Compatible with pigment ink, dye ink and ALL brands of Inkjet printers (HP, Brothers and more), Do NOT use Sublimation Ink.

Step 2: CUT & PEEL

Cut out your design with scissors or cutting machine, such as Cricut, Silhouette and more.

Peel your design from the backing LOGO paper.

NOTES: Transfer Paper is composed of two layers - the BLANK film and the backing LOGO paper.

Step 3: PLACE

1 REMOVE CREASES: Place your t-shirt on a SOLID surface (Don’t use ironing board as it’s too soft) and use your ironing tool to smooth out creases on shirt.

2 Place your design facing UPWARD onto appropriate position of T-shirt.

3 Cover it with Teflon Paper (included in the pack). NOTES: Place the GLOSSY side (other side is matt) of teflon paper towards your design to protect it during ironing

Step 4: TRANSFER

Please refer to the specific operations for your ironing tool accordingly in the above figure.

Step 5: REMOVE TEFLON PAPER

After ironing done, peel off teflon paper

Step 6: DONE

Congratulations! Your DIY image transfer has been done. Enjoy!

NOTES: Recommend NOT using printers with thermal printing technology. They will heat the transfer paper and may separate the film and the backing during printing.

After more than one hour of sunshine or light absorbing, it will present the BEST GLOW effect.

WASHING  INSTRUTIONS :

1.Don’t wash within 48 hours after transfer.2.Wash the garment before wearing.3.Don’t use bleach or alkaline detergent.4.Turn the garment inside out when washing.5.Don't soak to wash.6.Full spin cycle, cold water washing.7.No delicate washing.8.No tumble dry.9.Remove garment promptly after washing, colors may bleed if left wet too long.10.Unfold the transferred image, hang to dry naturally.

STORAGE INSTRUCTIONS:

1.Keep the image facing outside when fold the garment. 2. Store the garment in a dry and cool place.3.Keep the unused transfer paper sealed and preserved.