9 modes rear light
1. Always on (100%) for about 3 hours, press the switch button to switch in sequence2. Always on (70%) for about 3.2h, press the switch button to switch in sequence3. Strobe mode, about 9h, press the switch button to switch in sequence4. Slow flash mode, about 56h, press the switch button to switch in sequence5.SOS mode, about 9h, press the switch button to switch in turn6. The horse race flashes, about 14 hours, press the switch button to switch in sequence7. Tai Chi flashes, about 17h, press the switch button to switch in sequence8. Neon flashing, about 5h, press the switch button to switch in turn9. Breathing flashes, about 8h, press the switch button to switch in sequence
USB charging, 220mAh battery
- Micro USB input
- About 2h full
- Red light on the meter is charging, green light means charging is complete
Seatpost tail light installation
1. Take out the apron and tail light, and set the direction2. Snap the apron into the tail light clip3. After the card number, install the buckle
4. Mount the tail light on the seat tube
Helmet tail light installation
1. Tear the short Velcro off the adhesive2. Stick on both sides of the inside of the helmet3. The long Velcro is inserted into the clip4. Insert both ends of the long Velcro into the helmet5. Stick on both sides of the inside of the helmet
6. Installation is complete