Repotec RP-WR5441L Wireless N AP Router

RP-WR5441L is a wireless 11N Broadband Router suitable for Small Office/Home Office wireless network solution. It is a 4 in 1 network device, which combines wireless access point, firewall, 4-ports Switch and the NAT-Router. Its wireless data transmission rate is up to 150Mbps in 11n mode which enables to support wireless LAN up to 128-bit WEP, WPA/ WPA2 encryption security. RP-WR5441L provides WEB and Remote Management and system log so that network administrators can manage and monitor the network in real time.The RP-WR5441L comes with a hardware WPS (Wi-Fi protected setup) button, which helps you setup a secured wireless network in a snap minute and activate the wireless protection easily.

 System Requirement  Broadband Internet Access Service(DSL/Cable/Ethernet)

•  10/100Base-T Ethernet card and TCP/IP protocol installed for each PC
• Internet Explorer 5.0 or higher for Web configuration
•  802.11n , 802.11g or 802.11b compliant wireless adapters (for wireless connection)

Login

You can manage the Wireless 802.11b/g/n 150Mbps Broadband Router through the Web browser-based configuration utility. To configure the device via Web browser, at least one properly configured computer must be connected to the device via Ethernet or wireless network. The Wireless 802.11b/g/n 150Mbps Broadband Router is configured with the default IP address of 192.168.1.1 and subnet mask of 255.255.255.0 and its DHCP server is enabled by default. Before setting up the Router, make sure your PCs are configured to obtain an IP address automatically from the Router by the steps below.