Repotec RP‎-WR5441L Wireless N AP Router

RP‎-WR5441L is a wireless 11N Broadband Router suitable for Small Office/Home Office wireless network solution‎.‎ It is a 4 in 1 network device‎,‎ which combines wireless access point‎,‎ firewall‎,‎ 4‎-ports Switch and the NAT‎-Router‎.‎ Its wireless data transmission rate is up to 150Mbps in 11n mode which enables to support wireless LAN up to 128‎-bit WEP‎,‎ WPA/ WPA2 encryption security‎.‎ RP‎-WR5441L provides WEB and Remote Management and system log so that network administrators can manage and monitor the network in real time‎.‎The RP‎-WR5441L comes with a hardware WPS ‎(‎Wi‎-Fi protected setup‎)‎ button‎,‎ which helps you setup a secured wireless network in a snap minute and activate the wireless protection easily‎.‎

 System Requirement  Broadband Internet Access Service‎(‎DSL/Cable/Ethernet‎)‎

•  10/100Base‎-T Ethernet card and TCP/IP protocol installed for each PC
• Internet Explorer 5.0 or higher for Web configuration
•  802.11n ‎,‎ 802.11g or 802.11b compliant wireless adapters ‎(‎for wireless connection‎)‎

Login

You can manage the Wireless 802.11b/g/n 150Mbps Broadband Router through the Web browser‎-based configuration utility‎.‎ To configure the device via Web browser‎,‎ at least one properly configured computer must be connected to the device via Ethernet or wireless network‎.‎ The Wireless 802.11b/g/n 150Mbps Broadband Router is configured with the default IP address of 192.168‎.‎1.1 and subnet mask of 255.255‎.‎255.0 and its DHCP server is enabled by default‎.‎ Before setting up the Router‎,‎ make sure your PCs are configured to obtain an IP address automatically from the Router by the steps below‎.‎