GameSir designed an all-round mobile weapon—F9 Magnetic Cooler—to expel heat in most mobile devices. Besides native magnetic design, it comes with an additional magnetic sheet and a clamp, so that you can use it on any of your mobile devices, be it Android phone, iPhone, tablet, Switch or Steam Deck. Meanwhile, 2 cooling modes with real-time temperature display allow you to control and show how cool you want. If you’re looking for a versatile cooler, F9 is your go-to everywhere you play.

Note: It’s required to remove your phone case before use.

Specification

Working Platform:

• MagSafe-compatible iOS devices (Use the cooler only)
• Phones, tablets, Switch, Steam Deck and other mobile devices without magnetic area (Use the cooler with the included magnetic sheet)
• Mobile phones with a width of 65-90 mm (Use the cooler with the included clip)

Connection: Wired Type-C to the cooler, magnet / clamp to the phone

Power Input: 5V/2A

Battery: No

Product Size: Diameter 59.6 mm / 2.35 in , Thickness 24 mm / 0.94 in

Net Weight: 66 g / 0.15 lbs

Package Size: 120*87*52 mm / 4.72*3.43*2.05 in

Gross Weight: 165 g / 0.36 lbs

Instructions:

REQUIREMENTS

The following three requirements are applied for the three usage scenarios of the cooler accordingly:

1. Use the cooler only:

Compatible Devices: MagSafe-compatible iOS devices

Required Power Input: 5V/2A

2. Use the cooler with the attached magnetic sheet:

Compatible Devices: Phones, Tablets, Switch, Steam Deckand other mobile devices without magneticarea

Required Power Input: 5V/2A

3. Use the cooler with the attached clip

Compatible Devices: Mobile phones with a width of 65-90mm

Required Power Input:5V/2A

INSTALLATION AND USE

1. Tear off the protective film on the surface of the cooler.

2. The following three installation methods are adopted for the three usage scenarios of the cooler:

a. Use the cooler only on MagSafe-compatible iOS devices: place the Cooler’s magnetic surface on the back of the iOS device.

b. Use the cooler with the attached magnetic sheet on phones, tablets, Switch and other devices without magnetic area: place the magnetic sheet on the device’s back, then stick the cooler on the magnetic sheet.

c. Use the cooler with the attached phone clip on phones with a width of 65-90 mm: wrap F9 with the phone clip, pull out the clip and place the mobile phone in.

3. Use the Type-C cable to connect the Type-C port of the cooler and a USB power adapter (not included) after installing the cooler. Press the cooling mode switch once to reach Normal Cooling Mode with a solid green indicator; press the cooling mode switch twice to reach Hardcore Cooling Mode with a solid blue indicator.

Notes:

• Pay attention to avoiding the position of NFC while placing the magnetic sheet on the device with NFC function, otherwise, the NFC function will be affected.
• Devices that support wireless charging cannot be charged wirelessly when using the magnetic sheet.