SPECIFICATIONS The WR9X499 Refrigerator Cold Control regulates the temperature of the fresh food section. Installation Instructions for WR9X499 Generic instructions based on common refrigerator models 1. Disconnect electrical power supply to the appliance 2.remove console assembly and bring to a work space 3.Carefully remove cold control knob 4.Remove power tabs and unfasten cold control from console 5.Unfasten the sensor bulb and remove the entire cold control from the console 6.Slip the sensor bulb sleeve off of the old cold control 7.Straighten out the sensor bulb wire on the new cold control 8.Slip the sensor bulb sleeve over the new wire 9.Install the new cold control and thread the sensor bulb wire into place 10.Reattach the cold control power tabs and install the knob 11.Reinstall the console assembly into the refrigerator 12.Restore electrical power and test range refrigerator Repair Tip: Be sure to place the sensor bulb exactly as the old one is placed and install any insulating tubing that may come with the new thermostat or use the one from the old thermostat. Be careful not to bend or kink the sensory bulb too sharply. Replaces part numbers: 3WR9X499, AP2061705, 310893, AH310865, EA310865, PS310865, WR09X0499, GC192, 26357.Works with most top name brands:General Electric, Kenmore, HotpointFixes the following symptoms:Fridge too warmFridge too coldCount on our WR9X499 Refrigerator Cold Control for an unrivaled mix of durability, convenient functionality, and great value for money. Save your time and money now!If you are unsure our replacement part will fit your appliance model, you can ask us in Customer questions & answers section or contact us by visiting the Blue Stars LLC storefront -- click the "Blue Stars LLC" on a product page to get to the storefront --