Note! Don't work on MINI PCIE module slot. (please look the Picture). Compatible with: IPEX MHF4 Antenna Slot: Work with Intel 7260 7265 3160 8260 17265 18265 9260 9560 ax200 ax201 NGFF/M.2 Card Act （ Don't work on 7265D2W 8260D2W ） Broadcom BCM943228ZH BCM94352Z NGFF Card Act Broadcom BCM94360CSAX.BCM94360CS2.BCM94360CS2AX.BCM94360HMB WIFI WLAN CARD.

Impedance : 50 ohm Salt spray test : >= 48 hours, enhanced corrosion resistance Mounting : machined brass construction crimp & soldered mount Connection Protection: Black Heat Melt Shrink Tube Versafit or equivalent Operating frequency :0-6 GHZ ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G... ) Technical characteristics : temp. range : -65 to +165 ( PE cable range : -55 to +85 )

Attach an Antenna It's recommended you leave the antenna connected to the module at all times. The precision interface can easily be damaged by improper disconnection or re-connection. Follow these steps if you must reconnect an antenna: 1. Inspect the antenna receptacles on the module; don't use if deformed or damaged. 2. If possible, acquire or 3D print an installation tool. If using a tool; follow the instructions found with the tool. 3. For manual installation, align the connectors so they are perpendicular. Attempting to engage connectors at an angle damages both connectors. 4. Press the antenna wire connector straight down onto the module receptacle. You should hear an audible click and mechanical snap when a proper connection is made.

Note MHF4 connector is a tough nut to crack, especially for first-time users. It has to be dead-center and 90 degrees straight down to be pushed in with a tiny bit of force. Easy does it. Yes, it's a bit scary (just like first time riding a bicycle.) Do not ever think to try using a slightly tilted angle to wiggle it in. That will probably hurt the connector alignment itself.