Description:

Car Monitor Main Features: - It is with high quality and good durability - With small appearance, convenient for carry - Support 2-channel video input (V1, V2) - With high definition for good image - Support multi-role display - It can connect with reversing camera, DVD, VCD etc. 　 Screen: - Size: 4.3 inch TFT LCD - Resolution: 480 x 272 - Display Format: 16 : 9 With a stand holder which has adhesive sticker in the bottom for sticking it in the car Support automatically startup detection when reserving It can connect with reversing camera, DVD, VCD etc Video system: NTSC / PAL auto switchable NTSC It is installed in the drive foreground Display black screen on no signal Visible area: 72 x 53 mm 95*55 Car monitor temperature: - Work: -10 to 50 Degrees Celsius - Storage: -30 to 70 Degrees Celsius Car monitor color: Black Power consumption: 3W Power supply: DC 12V Dimensions x W x D): 120mm x 70mm x 15 mm Car Camera Features: * Waterproof / Weatherproof function * High view quality with night vision * With reference Line * Sensor:1/4"color Coms * Effective pixels: 628 x582 * Resolution: 480 TV Lines * Shutter speed: 1/60s-20us * Waterproof: IP68 * Minimum illumination: 0.2Lux * Voltage:12V * Operating temperature: -40 to +80 RH95%Max * TV System: NTSC * 8LED * Night Vision * Wide Angle 170° * Power Consumption: 60mA 　 Wireless Transmitter and Receiver: 1. It is easy to turn your car camera wireless camera. 2. To help you get rid of the clutter in the environment a long cable car, just connect the transmitter to the camera and the receiver to the monitor, then you can get a clear picture on the screen. 3. Convert any rearview camera with a standard RCA connector into a wireless camera with this universal transmitter and receiver. 4. The transmitter can also provide power to the camera, so you can connect it directly from the camera to turn it on. 5. Made of high quality and durable material. 6. Cigarette lighters with built-in receiver. Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit. Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end. The transmitter also includes a handy pass through for the power so you can connect it inline with your camera. Wireless transmitter with male phono plug and male power plug for supplying power to the camera. Wireless receiver with male phono plug for connection to monitor. Specifications: frequency:2370 MHz output power:100 MBT Power (DC):12 B video input:PAL/NTSC Sending and receiving range: 0--20 m (open area without interference or obstruction) Operating Temperature:-20 °C 80 °C video output:PAL/NTSC receiver Sensitivity:-85dBm operating current:DC = 12 B 200 MA cable length:1.5 M How to Install a Camera with the Wireless Module: Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car monitor - yellow plug for AV input. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative You will see the images when your car is in reverse shift. Note: This transmitter s for in-car monitor or DVD, Not for portable GPS Navigation.

Package including: 1 x Car Camera 1 x Car Monitor 1 x Transmitter 1 x Receiver