PREGNANCY TEST OPERATING INSTRUCTIONSIntended use:Used for early diagnosis of pregnancy.Test procedure:Before the use please prepare a timer and urine cup.1. The Pregnancy test is formulated for with fresh urine specimens.2. Urine cups should be used to collect specimens. Remove the strip from the wrapper.3. Immerse the strip into the urine with the arrow end pointing toward the urine.4. Do not cover the urine over the MAX (maximum) line. You may take the strip out after a minimum of 15 seconds in the urine and lay the strip flatly on a non-absorptive clean surface.5. Read the result within 5 minutes.6. Discard the test device after single use in the dustbinInterpretation of results:- Negative: only one Pink line appears in the control area, you can assume that you are not pregnant.- Positive: two pink lines appear both in the control area and test area, you can assume that you are pregnant.- Invalid: there is no distinct pink-purple coloured band visible both in the TEST area and CONTROL area. the test is inconclusive. It is recommended that in this case the test should be repeat. If the problem persists, contact your local distributorWarnings & precautionsFor in vitro diagnostic use only1. As with all diagnostic tests, a definitive diagnosis should not be based on the results of a single test, but should only be made by the physic. after all clinical and lab findings have been evaluated.2. Read directions for use carefully before performing this test. Pay attention to the position of the C and T line.3. Do not use the kit beyond the labeled expiry date.4. Do not reuse the test devices. Discard it in the dustbin after single use.5. Do not use if pouch is damaged or opened6. Do not touch the membrane area.7. Once you open the pouch. the test device should be used immediately. Prolonged exposure to ambient humidity will cause product deterioration.8. Treat urine samples and used device as if they are potentially infectious. Avoid contact with skin.