BaoFeng UV-82C Dual Band (VHF/UHF) Analog Portable Two-Way Radio. The UV-82C is a UV-82 that has initial limitations applied in order to make it FCC approved. The radio will have a Part 90 label manufacturer applied. Requires programming via a PC for initial use.Order for this BaoFeng UV-82C Analog Portable Two-Way Radio online from Jumia Kenya and have it delivered to you.

THE DUAL PUSH-TO-TALK DIFFERENCE

The UV-82 Series come with a dual push-to-talk button. The dual PTT is a huge leap forward in the HT technology. It allows you to transmit on two frequencies by the use of the rocker PTT switch. By pressing up you can transmit on "Frequency A" and by pushing down you can transmit on "Frequency B". Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones. On the BaoFeng UV-82C you are able to synchronize the PTT button to enable single Push-to-Talk communications.

The BaoFeng UV-82 Series

The UV-82 series has upped the bar on affordable ham radio technology! Compared to previous BaoFeng products (UV-5R, GT-3, and the v2+ Series) the UV-82 comes with a much louder speaker (1 watt), a much more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets. It is not simply a remake but a new radio from the ground up. It outperforms the the 2nd Gen UV-5R chipset (used in the UV-5Rs, GT-3 BF-F8+, and v2+ series).

VERSATILE RADIO FOR AMATEUR AND COMMERCIAL USE

The UV-82C is certified for use on commercial and amateur frequencies. The UV-82C is FCC Certified for Part 90 usage and is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).

Dual Watch Receiver

The UV-82C has one built-in receiver but can "watch" two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.

FM Broadcast Station

You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.

Group Tones supported

The UV-82C supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-82C supports the latest standards.The UV-82C can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones

Internal VOX function

The UV-82C has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.

Customize Your Operation with channels, Programmable Buttons, and more!

You can program your UV-82C exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.

Technical Specifications

Frequency range:

• [TX] 136 - 174MHz, 400 - 520MHz
• [RX] 136 - 174MHz, 400 - 520MHz, 68-108MHz (FM Broadcast)

Channel Capacity

• 128 Channels

Channel Spacing

• 25KHz (wide band)12.5KHz (narrow band)

Sensitivity

• ≤0.25μV (wide band)  ≤0.35μV (narrow band)

Operation Voltage

• 7.4V DC ±20%

Battery:

• 1800mAh

Frequency step:

• 2.5, 5, 6.25, 10, 12.5, 20, 25, 30 and 50KHz

Antenna:

• Antenna Connector: SMA-Female / Antenna Impedance: 50Ω

Accessory Connector:

• Kenwood 2 Pin Standard

Stability:

• ±2.5ppm

Output power:

• 5W / 1W

Audio Power Output

• 1000mW/10% (1 Watt)