Product Features
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Pure sine wave output on battery: Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
LCD status display: Provides key UPS status at a glance. LCD status display has multiple status indicators with load and battery bar graphs.
Cold-start capable: Provides temporary battery power when the utility power is out.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Network manageable: Provides remote power management of the UPS over the network.
Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators: Quickly understand unit and power status with visual indicators.
Serial connectivity: Provides management of the UPS via a serial port.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Hot-swappable batteries: Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers: Enable a quick recovery from overload events.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Adjustable voltage-transfer points: Maximize useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
General Specifications
- Max Configurable Power (Watts): 600 Watts / 1.0kVAOutput Voltage
- Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
- Other Output Voltages: 220, 240
- Topology: Line interactive
- Waveform type: Sinewave
- Transfer Time: 6 ms typical : 10 ms maximum
- Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing
- Input voltage range for main operations: 170 – 300 Adjustable, 180 – 287V
- Number of Power Cords: 1
- Battery type: Lead-acid battery
- Expected Battery Life (years): 4 – 6
- Typical recharge time: 3hour(s)
- Interface Port(s): RJ-45 Serial, USB
- Control panel: Multifunction LCD status and control console
- Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
How do i get this item?