AVAILABLE IN– TWO COLORS, TWO MODELS

The tempered glass panel allows showing off the internal components.

Black

White

Front Intake Fan – 200~1800 RPM / 83.5 CFM /2.3 mm H2O

Rear Exhaust Fan 200~1800 RPM / 83.5 CFM / 2.3 mm H2O

Black

White

Front Intake ARGB Fan 300~1650 RPM / 83.5 CFM / 2.3 mm H2O

Rear Exhaust Fan 200~1800 RPM / 83.5 CFM / 2.3 mm H2O

EXTREME AIRFLOW CRAFTMANSHIP

A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.

Top and 2x Bottom Side Panels

Front Panel

The 51% porosity offers an ample direct fresh air intake

HINGED PANELS ALL AROUND

The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.

FLEXIBLE CONFIGURATION

With ample interior room, the LANCOOL III can offer different cooling and usage scenarios

AIR Cooling

With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.

AIO Cooling

With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.

Custom Water Cooling

SPACIOUS COOLING SUPPORT

The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.

Multi-way Front Fan/Radiator Bracket

The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Note: The two thumbscrews (one in front, one on the left side) are applied for transportation security

Removable Top Fan Bracket

The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.

420mm Radiator *

TOP

1. Do not remove the top fan bracket
2. Orient the radiator tubing side toward the rear of the chassis
3. Remove the rear 140mm fan for radiator installation

Modular PSU Shroud Bracket – Fan/ Pump/ SSD

The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.

Back-and-forth adjustability to accommodate for different 360 radiator orientations.

Included mounting points for 3 × 2.5” SSDs.

Additional pump/reservoir combos mounting points are provided.

Side Multi-Purpose Mounting Slots

Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.

EXTENSIVE STORAGE CAPACITY

Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.

❶

Adjustable Drive Cage 2 adjustable drive cages (each for 2 x 3.5” HDDs or 2 x 2.5” SSDs) can be individually removed or adjusted.

❷

Toolless SSD tray Two spring-loaded SDD trays located behind the motherboard tray allow for a toolless installation of the drives.

❸

Side SSD tray The side-mounted SSD trays located inside the right PSU shroud panel can support up to 3 x 2.5” SSDs or can be removed to improve airflow.

Clearance for front radiator

Clearance for long PSU

ree space for unobstructed airflow

Standard mode for drive installation

COMPREHENSIVE CABLE MANAGEMENT

As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.

Sliding Cable Routing Cover

Standard ATX Motherboard

E-ATX Motherboard (width 280mm)

FRIENDLY PSU INSTALLATION