Features

• Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
• Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Power-saving outlets: Automatically cuts power to idle equipment to conserve electricity.
• Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
• Battery-protected and surge-only outlets: Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
• Cold-start capable: Provides temporary battery power when the utility power is out.
• Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port.
• Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Disconnected battery notification: Warns when a battery is not available to provide backup power.
• Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Audible alarms: Provides notification of changing utility power and UPS power conditions
• User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• USB connectivity: Provides management of the UPS via a USB port (not available on all models).
• Serial connectivity: Provides management of the UPS via a serial port.
• Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
• Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Battery replacement without tools: Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
• LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.

Benefits

• Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
• Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
• Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

• Energy Management Function: Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
• Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Customizable voltage-transfer points: Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
• Customizable voltage sensitivity: Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
• Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Cold-start capable: Provides temporary battery power when the utility power is out.
• Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.

• Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse.
• Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.

• USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
• LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
• Audible alarms: Provides notification of changing utility power and UPS power conditions
• Disconnected battery notification: Warns when a battery is not available to provide backup power.

• Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical Specifications

• Output Power Capacity: 865 Watts / 1500 VA
• Max Configurable Power: 865 Watts / 1500 VA
• Nominal Output Voltage: 230V
• Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
• Crest Factor: 3 : 1
• Topology: Line Interactive
• Waveform Type: Stepped approximation to a sinewave
• Output Connections: (5) IEC 320 C13 (Battery Backup), (5) IEC 320 C13 (Surge Protection), (2) IEC Jumpers (Battery Backup)

• Nominal Input Voltage: 230V
• Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections: IEC-320 C14
• Input voltage range for main operations: 176 - 294V
• Input voltage adjustable range for mains operation: 156 - 300V
• Input Breaker Capacity: 10.0 A

• Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time: 8 hour(s)
• Replacement Battery: APCRBC124, APCRBC124J
• RBC™ Quantity: 1
• Extended Run Options: APC Power-Saving Back-UPS Pro 1500, 230V

• Interface Port(s): Optional Simple Signalling RS232 cable, USB
• Control panel: Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

• Surge energy rating: 441 Joules
• Filtering: Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous
• Data Line Protection: Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

• Maximum Height: 301.00 mm
• Maximum Width: 112.00 mm
• Maximum Depth: 380.00 mm
• Net Weight: 12.70 KG