Tenda TEG5328F is a Gigabit L3 switch with 24x RJ45 and 4x SFP ports. 24x RJ45 (10/100/1000 Mbps) + 4x SFP (1000 Mbps). Layer L3 routing, STP/RSTP/MSTP, IGMP Snooping V1/V2/V3, VLAN, Static + aging ARP, QoS SP/SWRR/WRR/802.1p/DSCP, SNMP, DHCP server, 6kV surge protection, Rackmount.

Technical parameters Standards & Protocols: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3ad, IEEE802.3z, IEEE802.3x, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d? IEEE802.1s LED Indication: 1x Link/Act, 1x Power LED, 1x SYS LED Ports: 10x 10/100/1000 Base-T Ethernet ports, 2x 1000 Base-X SFP ports, 1x Console port Surge protection level: - for ports: 6kV, - for power supply: 6kV, ESD: air: ± 10kV, contact: ± 8kV Switching mode: Store-and-forward Total throughput: 56 Gbps Packet switching: 41.70 Mpps Buffer: 12Mb MAC address table size: 16K Jumbo frame 10K Power supply: from mains 100-240V AC 50/60Hz Consumption: 10W (no load), max. 24W (max. Load) Device dimensions: 440.0mm x 178.8mm x 44mm (L * W * H) Mounting/operating methods: rackmount, wall, desktop Working temperature: 0oC ~ 45oC Humidity: 10% -90% RH (non-condensing) Certification: FCC/CE/RoHS L3 Features: VLAN-based routing, IPv4 static routing adding, Static ARP adding/deleting, ARP aging time configuration Security features: ARP receiving limit, Unknown MAC address discard, DoS attack defense, 802.1x security authentication, Radius security authentication VLAN: IEEE 802.1Q VLAN, VLAN Layer-3 interfaces, Supports three port modes: Access, Trunk and Hybrid DHCP: DHCP Server, DHCP Relay, DHCP Snooping, Supports Option 82 policy configuration Port aggregation: Static aggregation, LACP dynamic aggregation Spanning tree: IEEE 802.1d STP (Spanning Tree Protocol), IEEE 802.1w RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s MSTP (Multiple Spanning Tree Protocol), Supports edge port, Supports BPDU statistics Multicast: IGMP Snooping V1/V2/V3, Supports port fast leave Port Mirroring: Supports N: 1 port mirroring QoS: SP (Strict Priority), SWRR (Simple Weighted Round Robin), WRR (Weighted Round Robin), Supports 802.1p port trust mode, Supports DSCP port trust mode, Supports a maximum of 8 queue service quality mapping ACL: Supports MAC ACL and IP ACL Loading and upgrade: Supports FTP/TFTP/HTTP upgrade, Supports configuration import and export Management and maintenance: Supports Telnet, Supports SNMP V1/V2/V3, Supports WEB management and maintenance, Supports Ping/Tracert/Connection Detection, CPU Monitoring and memory monitoring

Highly efficient data transfer at the L3 layer It supports L3 layer static routing protocols, L3 forwarding for more than 400 terminals, L3 routing and forwarding over network segments and can isolate L2 and L3 layers from each other. Compared to using the L2 switch, it is not necessary to go through the router to transfer data.

Flexible QoS, precise data traffic control, 12MB buffer The TEG5328F supports three QoS scheduling modes (SP, SWRR, WRR) for more accurate traffic control. After enabling QoS, network traffic will be precisely controlled by data priority. It prioritizes critical traffic and reduces the proportion of data traffic that takes up a lot of traffic under limited bandwidth conditions. All this with support using a huge 12MB buffer.

L2 and L3 ACL support, for a higher level of security Support for access control based on MAC address or IP address, unsolicited packets are filtered out immediately.

Prevents network attacks Supports IP/MAC/ARP/DoS attack filtering, automatically activate attack protection according to network protection settings.

Package contents 1x Tenda TEG5328F 1x Set of brackets "L" for anchoring in a rack 1x Cable Console 1x Quick installation guide (CZ, SK, PL, EN) 1x Power cable 230V