PremiumCord Ultra High Speed HDMI 2.1 optical fiber cable 8K@60Hz, gold-plated 30m The optical HDMI 2.1 Ultra High Speed 8K@60Hz or 4K@120Hz cable is used to connect two audio/video devices via a modern HDMI interface, such as an HD-DVD/BluRay player and an LCD/Plasma television. the cable transmits digital audio and video and supports HDCP content digitization protection.

• HDMI 2.1 Ultra High Speed active optical fiber cable, supports HDMI2.1 or lower HDMI2.0 and HDMI1.4
• Supports Ultra High Definition resolution 8K@60Hz, 4K@120Hz, YUV 4:4:4
• Maximum data transfer: 48 Gb/s
• Hybrid optical cable with a diameter of 5mm - 4x OM3 optical fiber + 7x wires
• Gold-plated connectors: HDMI type A (19-pin) male <=> HDMI type A (19-pin) male
• Resolution: 8K UHD (7680p) at 60Hz, 4K UHD (3840p) at 120Hz or lower supported formats 1080p FULL HD/1080i/720p/720i
• The optical cable is backward compatible with HDMI 2.0a, 2.0, 1.4 and lower versions
• Supports eARC, ARC, HEC, EDID, DDC
• Supports CEC (Consumer Electronics Control)
• Supports HDR (High Dynamic Range)
• Supports VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode)
• Supports 4:4:4 color subsampling
• 3D video via HDMI connection
• Supports HDCP1.4/HDCP2.2/HDCP2.3
• Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X etc.)
• Dolby TrueHD and DTS-HD Master Audio Bitstream Compatible
• Supports Audio Return Channel (ARC)
• Compatible with HDMI Ethernet Channel (HEC)
• EDID support
• Complete power supply with HDMI bus consumption less than 250mW, does not need external power supply
• Optical cable thickness 5mm
• Optical fiber: OM3 Multimode Fiber Optic
• Cable covered with braid
• Gold-plated connectors in metal caps
• Flexible optical cable for small bending radius: 20mm
• The optical cable is packed in a paper box with instructions and affixed with a label with a description and EAN code
• Connector dimensions: HxWxD/51x19x9mm (connector dimensions without grommet)
• Sony PS5 console support
• Cable color: black/white braid
• Connector color: black/beige
• Cable length: 30 m

The cable contains active electronics that only work in one direction of the signal. The cable must always be connected when the devices are turned off and only in the direction marked on the cable. The connector marked "Source" is always connected to the broadcasting device (DVD, Blueray). The connector marked "Display" is always connected to a display device (LCD, television, projector).