4-port USB 3.0 hub AXAGON HUE-S2BL with USB 1.2 m long cable, external power options and support for rapid on all ports. Lightweight small hub with a sleek matte plastic body connects quickly and easily to a PC up to four USB devices simultaneously. Rigidly mounted 1.2 m long USB cable is suitable for use with a desktop PC.

The big advantage is the possibility of external power charger hub from any mobile device with a micro USB connector. Unused charger and free makes this USB hub fast charging hub. Mobile phones, tablets and other devices PowerBank can charge current up to 2A (depending on the charger used) in any port hub with support for USB Battery Charging 1.2 Support charging tablet iPad, even without an additional power supply approx. 1A (directly from the USB 3.0 port on the computer usually can not charge iPad). It can operate as a standalone charging hub and charge USB devices from the power adapter after you shut down or disconnect the computer.

Permanent connection can handle multiple external drives without external power supply hub. After connecting the external power supply can also work with three external drives simultaneously. Across USB ports with sufficient spacing for direct connect seamlessly bulky USB device.

Properties: • 4 downstream USB 3.0 ports with sufficient space around the connectors. • USB 3.0 upstream port with USB 3.0 Type-A male rigidly clamped to 120 cm long cable. • Compatible with USB 3.0, backward compatible with USB 2.0 and USB 1.1 devices. • Support transfer rate 1.5/12/480/5000 Mbit/s (low/full/high/super speed). • Support USB Battery Charging v 1.2 specification. • Each port hub can be used for charging current up to 2 A (with external USB charger - not included). • Connection of devices running thanks to the support Hot Plug. • Full support Plug and Play. • LED connection hub to power. • Detection and protection against current overload. • Dimensions hub 96 x 32 x 22 mm. • Weight hub 76 g (incl. Cable).

Power mode hub via a USB cable (bus power): • Powered by the USB bus is sufficient to connect USB devices with low power consumption (mouse, keyboard, card reader, flash disk, etc.) Or self powered (printer, scanner, 3.5 "external drive) to all four ports. • USB hub in this mode, the unit also tightened up 2 Magnetic 2.5 "external drives simultaneously. • Charging of mobile devices (including iPad) is also in this mode operation possible, but the charging current reaches 0.9A only, in some cases through 1A (depending on computer).

Mode power supply hub own USB charger - not included (self power): • You can use any charger mobile device with a micro USB connector (recommended output current of 2A charger). • USB hub in this mode power supply can handle 3 magnetic 2.5 "external drives. For reliable long-term operation of the hub, we recommend connecting max. 2 magnetic external 2.5" drives simultaneously. • Quick-mobile devices (including the iPad) current up to 2A at each of the ports on the hub. Total current supplied by the hub when charging is limited by the output current of the external power adapter.

Standalone mode charging mouth without connecting to a computer (charging hub) • After switching off the connected computer or no computer hub works with Power over USB charger as a single charging USB hub. • Quick-mobile devices (including the iPad) current up to 2A at each of the ports on the hub. Total current supplied by the hub when charging is limited by the output current of the external power adapter.

Supported operating systems: MS Windows XP/Vista/7/8/8.1/10 and later, Windows Server 2003/2008/2012/2016 and newer (support for all 32- and 64-bit versions of Windows), Mac OS X 10.4.x higher, Linux with kernel 2.6.x later. Note .: The drivers are part of the supported operating systems and installed automatically. No other driver installation is needed and are not available.

Packed in a cardboard box with clearly set out the parameters and the installation procedure includes: • USB 3.0 hub with fixed cable length of 120 cm.