The round USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1AL with a 1.2m long USB cable easily and quickly connects up to four USB devices to the computer at the same time. Three USB ports are distributed around the perimeter and will allow the seamless connection of any USB device, incl. bulky flash drives or USB readers. The fourth USB port, located at the top, is ideal for connecting a wireless adapter for better signal reception or for easily inserting a flash drive, for example, with one hand. The rubber pad prevents the sponge from sliding on the table. The fixed USB cable of 120 cm length is suitable for use with a desktop computer. This compact hub can handle the permanent connection of several external drives. Its versatility is enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply, for example, even more external drives can be connected to the computer or the number of mobile phones charged can be increased. The USB 3.2 Gen 1 standard allows a transfer speed of up to 5Gb/s . The hub also enables charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Apple iPhone, iPad, etc. from the hub.

Input: • 1x USB 3.2 Gen 1/SuperSpeed USB port, USB-A male connector. • Backward compatible with USB 3.1 Gen 1/USB 3.0/USB 2.0 and USB 1.1. • A male USB connector located on a fixed 120 cm cable.

Outputs: • 4x SuperSpeed USB port, USB-A female connectors. • Support for transmission speeds of 5.000/480/12/1.5 Mb/s (SuperSpeed/High/Full/Low speed). • Total throughput/transfer speed is determined by the USB 3.2 Gen 1 interface used (theoretically 5 Gbit/s).

Properties: • Ability to connect devices on the fly thanks to Hot Plug support. • Full Plug and Play support. • Power saving mode support. • High-quality shielded cable guarantees high communication speed and minimal unwanted interference. • The blue LED indicates the connection of the hub to the computer. • Dimensions 60 x 18 mm. • Weight 53 g (incl. cable). • USB cable length 120 cm.

Hub power mode via USB cable (bus power): • USB bus power supply is sufficient for connecting USB devices with low consumption (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. • The USB hub in this power mode also drives up to 2 magnetic 2.5" external drives at the same time. • Charging mobile devices (including iPad) with a current of up to 1.5A in each of the ports of the hub. The total charging current (which is divided into ports) reaches up to 2.5A at a voltage of 5V (depends on the capabilities of the computer USB port).

Mode of power supply via USB + external power supply of the hub from a USB charger (self power): • Integrated micro USB connector in the body of the hub for additional power supply of the hub. • Any mobile device charger (not included) with a micro USB connector can be used (recommended charger output current min. 2A). • The USB hub can handle up to 3 magnetic 2.5" external drives in this power mode. Recommended for connecting to smartphones and tablets. • Charging mobile devices (including iPad) with a current of up to 1.5A in each of the ports of the hub, the total charging current (which is divided into ports) reaches up to 4.5A at a voltage of 5V (depends on the options of the external power adapter).

Supported operating systems: • MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016/2019/2022 and later (all 32-bit and 64-bit versions of Windows OS are supported), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and higher, Android most versions. • Note: The drivers are part of the supported operating systems and are installed automatically. No other drivers need to be installed and are not available.

Packaging in a cardboard box with a hole for hanging contains: • SuperSpeed USB hub with fixed cable length 120 cm, • multilingual manual CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/RU/SWE/TR/BG/CN/ARA.