High performance - very soft Based on silicone and a special filler, TP-3 also outperforms high-performance pads, especially when there are typically height differences between closely spaced chips due to manufacturing tolerances. TP-3 offers excellent thermal conductivity despite its extremely low hardness.

How is it tested? TP-3_thickness_comparison Minimization of thermal resistance The thinner the pad, the lower the thermal resistance. The 0.5mm thick TP-3 pad can easily be pressed down to 0.3mm to even out height differences between different components up to 0.2mm. Please note that due to the extremely low hardness, the installation of the 0.5mm washer requires extra care. Please read the user manual.

Versatile applications Thermally conductive, vibration dampening, formable, electrically insulating - safe and easy to use. Due to its good compression properties, the soft thermally conductive pad is particularly gentle on the components and at the same time conducts heat well. In addition to the standard format for M.2, TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAM, chipsets and ICs of all kinds used in PCs, laptops, consoles, graphics cards and electronic devices in general.

TP-3 cut tm Safe handling ARCTIC TP-3 is electrically insulating, non-sticky and easy to handle. This means that optimal and safe heat transfer can be ensured in many areas of use.

TP-3 pressed Bridging the gaps TP-3 are softer than conventional inserts and are therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressible properties, thermal pads act as a perfect joint filler and bridge uneven surfaces and air gaps without stressing sensitive and protruding parts.

TP-3 thickness sizes Available in various thicknesses and sizes Our thermal pads are available in a choice of 0.5mm, 1.0mm and 1.5mm. The 0.5 mm variant is ideally suited as an alternative to heat-conducting foil. Pads are available in different sizes depending on their thickness. If necessary, the pads can also be independently cut to any size.

TECHNICAL SPECIFICATIONS & MANUAL General data Color: Blue Hardness: 55 Shore OO Continuous use temperature: -40~150? Specific gravity: 3.4 g/cm3 Dielectric constant @1MHz: 5.19 Volume resistivity: 2.69 X 1012 ?-cm Flammability rating: UL 94 V-0

High Performance - very soft Based on silicone and a special filler, TP-3 also outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.

How is it tested? TP-3_thickness_comparison Minimization of thermal resistance The thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.

Versatile Applications Heat-conducting, vibration-damping, moldable, electrically insulating - safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards and electronic devices in general.

TP-3 cut dark Safe handling The ARCTIC TP-3 is electrically insulating, non-adhesive and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.

TP-3 pressed Bridging gaps The TP-3 are softer than conventional pads and therefore particularlysuitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridges uneven surfaces and air gaps without stressing sensitive and protruding components.

TP-3 thickness sizes Available in different thicknesses and sizes Our thermal pads are available in a choice of 0.5 mm, 1.0 mm and 1.5 mm. The 0.5 mm variant is ideally suited as an alternative to heat-conducting foil. The pads are available in different dimensions, depending on their thickness. If required, the pads can also be independently cut to any size.

TECHNICAL SPECIFICATIONS & MANUAL General data Color: Blue Hardness: 55 Shore OO Continuous Use Temperature: -40~150? Specific Gravity: 3.4 g/cm3 Dielectric Constant @1MHz: 5.19 Volume Resistance: 2.69 X 1012 ?-cm Flammability Rating: UL 94 V-0