A proper network setup with a modem/router/gateway ‎-sold separately‎- must be in place to be able to use this device

The new NanoBeam M has a compact‎,‎ all‎-in‎-one design with uniform beam width‎,‎ efficient footprint and a faster processor‎.‎ The NanoBeam can be easily mounted in a variety of ways thanks to the innovative mechanical design‎.‎

Improved Noise Immunity

The NanoBeam directs RF energy in a tighter beamwidth‎.‎ With the focus in one direction‎,‎ the NanoBeam blocks or spatially filters out noise‎,‎ so noise immunity is improved‎.‎ This feature is especially important in an area crowded with other RF signals of the same or similar frequency‎.‎

Integrated Design

The NanoBeam models are available in two form factors‎:‎

• All‎-in‎-One Design‎:‎ The Ubiquiti Research and Development team combined the radio and antenna to create a more efficient and compact CPE‎.‎ The NanoBeam gets maximum gain out of the smallest footprint‎.‎
• Dish Reflector Design‎:‎ Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhorn of an antenna‎,‎ so there is no need for a cable‎.‎ This improves performance because it eliminates cable losses‎.‎

Providing increased performance from its faster processor and innovative mechanical design at a low cost‎,‎ the NanoBeam is extremely versatile and cost‑effective to deploy‎.‎

Utilize airMAX Technology

Unlike standard Wi‎-Fi protocol‎,‎ Ubiquiti’s Time Division Multiple Access ‎(‎TDMA‎)‎ airMAX protocol allows each client to send and receive data using pre‎-designated time slots scheduled by an intelligent AP controller‎.‎

This “time slot” method eliminates hidden node collisions and maximizes airtime efficiency‎.‎ It provides significant performance improvements in latency‎,‎ throughput‎,‎ and scalability compared to all other outdoor systems in its class‎.‎ Intelligent QoS Priority is given to voice/video for seamless streaming‎.‎

Scalability High capacity and scalability‎.‎

Long Distance Capable of high‑speed‎,‎ carrier‎-class links‎.‎

Innovative Mechanical Design

• All‎-in‎-one design‎:‎ The NanoBeam provides both the radio and antenna in the smallest possible footprint‎.‎
• Quick and easy installation‎:‎ No fasteners are required for pole‎-mounting‎,‎ and a single wall fastener ‎(‎not included‎)‎ is required for wall‎-mounting‎.‎
• Convenient alignment‎:‎ The NanoBeam pivots on its ball joint for easy aiming‎.‎

Compact Form Factor

• Efficient footprint‎:‎ The radio and antenna are combined into a single body that takes up minimal space‎.‎
• Versatile mounting‎:‎ The NanoBeam can be mounted in almost any position needed for line of sight‎.‎
• Aesthetics‎:‎ The NanoBeam is small enough to blend discreetly into the background at a customer‎'‎s location

Product Features

• Uniform Beamwidth Improves Noise Immunity
• More Efficient Footprint
• Faster Processor Increases Performance
• Easy Assembly and Installation

Technical Specifications‎:‎

• Processor‎:‎ Atheros MIPS 74KC‎,‎ 560 MHz
• Memory‎:‎ 64 MB DDR2‎,‎ 8 MB Flash
• ‎(‎1‎)‎ 10/100 Ethernet Port
• Wireless Approvals‎:‎ FCC‎,‎ IC‎,‎ CE
• RoHS Compliance‎:‎ Yes
• Power Supply‎:‎ 24V‎,‎ 0.5A PoE
• Power Method‎:‎ Passive PoE ‎(‎Pairs 4‎,‎ 5+‎;‎ 7‎,‎ 8 Return‎)‎
• Max‎.‎ Power Consumption‎:‎ 8W
• Operating Frequency‎:‎ 5.725‎-5.875GHz
• Gain‎:‎ 19dBi
• Max‎.‎ VSWR‎:‎ 1.5‎:‎1
• Output Power‎:‎ 26 dBm 
• Wind Loading‎:‎ 10.2 lbf @ 125 mph
• Wind Survivability‎:‎ 125 mph
• LEDs‎:‎ ‎(‎1‎)‎ Power‎,‎ ‎(‎1‎)‎ LAN‎,‎ ‎(‎4‎)‎ WLAN
• Signal Strength LEDs‎:‎ Software‎-Adjustable to Correspond to Custom RSSI Levels
• Channel Sizes‎:‎ 5/8/10/20/30/40 MHz
• Polarization‎:‎ Dual Linear
• Enclosure‎:‎ Outdoor UV Stabilized Plastic
• Mounting‎:‎ Pole‎-Mount ‎(‎Kit Included‎)‎‎,‎ Wall‎-Mount
• ESD/EMP Protection‎:‎ Air‎:‎ ±24 kV‎,‎ Contact‎:‎± 24 kV
• Operating Temperature‎:‎ ‎-40 to 70° C
• Operating Humidity‎:‎ 5 to 95% Non‎-Condensing
• Shock & Vibration‎:‎ ETSI300‎-019‎-1.4