Get soft beautiful feet effortlessly. Velvet Smooth Roller Head with long lasting micro-abrasive particles now comes with finely ground diamond crystals. It buffs away hard skin in an instant. leaving you with fabulous visibly smooth feet.

Ergonomically-designed soft touch handle - Replaceable Roller Head with Diamond Crystals - Gentle & Effective Rotating Action - Battery Operated - Ready to use

Pack Contents:

1 x Electronic Foot File

1 x Coarse Roller Heads

1 x Cover

It's so easy to use 

gently rotate the file over hard skin and see the dead skin disappear.

Retain the outer packaging for future reference. See inside for full instructions.

Using for the First Time

1. Unscrew the base of the unit in an anti-clockwise direction and remove.
2. Replace the base of the unit and screw in a clockwise direction until secure.
3. Follow the directions for Regular Usage.

Regular Usage:

1. Remove the protective roller cover before use.
2. Ensure that the roller head is securely inserted into the unit. Do not use without the roller head attached.
3. Turn on by twisting the silver ring to the left and gently glide the roller-head gently over heard skin and the dead skin will gradually disappear.
4. Use only on dry skin. 
5. Do not press too hard, or the unit will stop.
6. Turn off and check if you have achieved the softness you desire. If not, turn on and repeat until the level of smoothness is obtained.
7. Once you feet are starting to resemble smooth, happy feet again, breathe a sigh of relief.
8. Turn off by twisting the silver ring to the right.
9. Wipe or rinse feet to remove excess dead skin particles.
10. Thoroughly dry feet
11. Apply moisturizer and massage into your fabulous smooth feet!

Cleaning after use;

The Velvet Smooth with Diamond Crystals Electronic Foot File is not waterproof. Detach and wash the roller head to clean the surface.

1. Turn the unit off.
2. Remove the roller by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Rinse the roller head under the tap.
4. Clean the body of the unit with a clean damp cloth.
5. Dry both the roller head and main unit with a clean dry cloth.
6. Replace the roller and the protective cover.

Changing the Roller Head:

For the perfect finishing touch use Velvet Smooth with Diamond Crystals Soft Touch Roller Head. For very hard, stubborn skin Velvet Smooth with Diamond Crystals Extra Coarse Roller Head. Replace the roller head when you find it becomes less effective. Use only Scholl Velvet Smooth Roller Heads with this product.

1. Ensure that the unit is turned off.
2. Remove the roller by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Place the new roller into the unit by pressing in the pins on either sides of the roller head and inserting the head into the device.
4. Check that the roller head is securely attached to the device before use

Changing the Batteries:

1. Unscrew the base of the unit in an anti-clockwise direction.
2. Remove the base and remove the used batteries.
3. Insert 4 new high power AA batteries in the directions indicated on the unit.
4. Replace the base and screw in a clockwise direction until secure.
5. Do not mix old and new batteries or alkaline and standard batteries. Do not use rechargeable batteries. Used batteries must be recycled or disposed of correctly.

Warning:

1. Do not use in the same area more than 3-4 seconds at a time. Stop if  use immediately if irritation or discomfort occurs skin becomes sore or inflamed.
2. For use on hard skin on the feet only. Use only on dry (not wet) skin 
3. Do not use the device anywhere else on the body. Only use for its intended purpose. 
4. Keep out of reach of children. 
5. Do not use on broken, sore or irritated skin. 
6. Do not submerge the device in water. 
7. This product is not suitable for diabetics and those with poor blood circulation. 
8. Keep long hair and clothing away from the device when in use.