How to use‎?‎ Just Keep Pressing Until Liquid Flows Out‎.‎ Share Fix it‎!‎ Pro applicator thoroughly with cap on‎.‎ Apply Fix it‎!‎ Pro in shaded area With tip pointed down‎,‎ PRESS & RELEASE spring tip on a surface until tip is saturated‎.‎ Protect tip from sunlight‎!‎ It may take 40 to 50 presses to saturate the tip Apply along & into damaged clear coat‎.‎ Work quickly‎,‎ Fix it‎!‎ Pro cures in direct sunlight‎.‎ Apply at temperatures above 55 degrees ‎(‎F‎)‎ Quickly wipe off excess with dry paper towel‎,‎ as Fix it‎!‎ Pro can cure rapidly‎.‎ Allow to cure in sunlight until dry ‎(‎1‎-48 hrs‎)‎ Note‎:‎ Deeper scratches may require additional applications‎.‎ Fix it‎!‎ Pro will harden in the sunlight & the cap must be on at all times the pen is not in use to prevent the tip from hardening‎.‎ It can cure only the scratch without damage on the paint basic Deep scratch that has been damage the base paint is not able to be cure by Fix It‎!‎ Pro Clean selected area & dry before apply Attention‎:‎ when you put the tip inside the pen‎,‎ please keep the small ends inwards When press the tip‎,‎ please give it some time to get the liquid to flow into the tip ‎.‎