Features

• Green mode‎:‎ Patent‎-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection‎.‎
• Boost and Trim Automatic Voltage Regulation ‎(‎AVR‎)‎‎:‎ Eliminates voltage fluctuations as a source of AV signal degradation and component power‎-supply stress‎.‎
• Battery failure notification‎:‎ Provides early‎-warning fault analysis on batteries enabling timely preventive maintenance
• Power‎-saving outlets‎:‎ Automatically cuts power to idle equipment to conserve electricity‎.‎
• Resettable circuit breaker‎:‎ Easy recovery from overloads‎;‎ no need to replace a fuse‎.‎
• Battery‎-protected and surge‎-only outlets‎:‎ Reserves power capacity and run time for connected equipment that require UPS battery back‎-up while providing surge only protection for less critical equipment
• Cold‎-start capable‎:‎ Provides temporary battery power when the utility power is out‎.‎
• Serial connectivity‎:‎ Use any Home Automation network to monitor and control the S20 through its RS‎-232 serial port‎.‎
• Hot‎-swappable batteries‎:‎ Ensures clean‎,‎ uninterrupted power to protected equipment while batteries are being replaced
• Disconnected battery notification‎:‎ Warns when a battery is not available to provide backup power‎.‎
• Dataline surge protection‎:‎ Provides protection of connected equipment from power surges on the data lines‎.‎
• Automatic self‎-test‎:‎ Periodic battery self‎-test ensures early detection of a battery that needs to be replaced‎.‎
• Adjustable voltage‎-transfer points‎:‎ Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation‎.‎
• Adjustable voltage sensitivity‎:‎ Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications‎.‎
• Audible alarms‎:‎ Provides notification of changing utility power and UPS power conditions
• User‎-replaceable batteries‎:‎ Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair ‎(‎MTTR‎)‎
• USB connectivity‎:‎ Provides management of the UPS via a USB port ‎(‎not available on all models‎)‎‎.‎
• Serial connectivity‎:‎ Provides management of the UPS via a serial port‎.‎
• Transformer‎-block spaced outlets‎:‎ Protect equipment with input transformer blocks without blocking access to other receptacles‎.‎
• Boost and Trim Automatic Voltage Regulation ‎(‎AVR‎)‎‎:‎ Gives higher application availability by correcting low and high voltage conditions without using the battery ‎(‎not available on all models‎)‎‎.‎
• Intelligent battery management‎:‎ Maximizes battery performance‎,‎ life‎,‎ and reliability through intelligent‎,‎ precision charging‎.‎
• Safety‎-agency approved‎:‎ Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment‎.‎
• Battery replacement without tools‎:‎ Enables fast battery replacement‎,‎ lowering Mean Time to Repair ‎(‎MTTR‎)‎‎.‎
• LCD graphics display‎:‎ Text and mimic diagrams that display modes of operation‎,‎ system parameters and alarms‎.‎

Benefits

• Battery and surge protected outlets‎:‎ Back up and protect your hardware and data during power outages‎,‎ surges and spikes‎.‎
• Dataline surge protection‎:‎ Provides protection of connected equipment from power surges on the data lines‎.‎
• Surge only outlets‎:‎ Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage‎.‎

• Energy Management Function‎:‎ Energy saving feature automatically power off peripherals when the a master device‎,‎ usually a PC‎,‎ hibernates or is shut down‎.‎ Power to peripherals is immediately restored when the master device wakes up or is switched on‎.‎
• Boost and Trim Automatic Voltage Regulation ‎(‎AVR‎)‎‎:‎ Gives higher application availability by correcting low and high voltage conditions without using the battery ‎(‎not available on all models‎)‎‎.‎
• Green mode‎:‎ Patent‎-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection‎.‎
• Customizable voltage‎-transfer points‎:‎ Adjust the voltage points ‎(‎widen or tighten the range‎)‎ where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics‎.‎
• Customizable voltage sensitivity‎:‎ Toggle between pre‎-determined voltage‎-transfer points depending on your power quality ‎(‎high‎,‎ medium or low sensitivity‎)‎‎,‎ maximizing useful battery life and protecting sensitive electronics‎.‎
• Intelligent battery management‎:‎ Maximizes battery performance‎,‎ life‎,‎ and reliability through intelligent‎,‎ precision charging‎.‎
• Cold‎-start capable‎:‎ Provides temporary battery power when the utility power is out‎.‎
• Battery failure notification‎:‎ Provides early‎-warning fault analysis on batteries enabling timely preventive maintenance
• Automatic self‎-test‎:‎ Periodic battery self‎-test ensures early detection of a battery that needs to be replaced‎.‎
• Transformer‎-block spaced outlets‎:‎ Protect equipment with input transformer blocks without blocking access to other receptacles‎.‎

• Resettable circuit breaker‎:‎ Easy recovery from overloads‎;‎ no need to replace a fuse‎.‎
• Simple battery replacement‎:‎ Increases UPS availability by allowing quick‎,‎ easy battery replacement‎.‎

• USB connection‎:‎ Use your PC to access additional power protection and management features for your UPS via a USB Port‎.‎
• LCD Status Display‎:‎ Provides key UPS status at a glance‎.‎ Multiple status indicators with load and battery bar graphs‎.‎
• Audible alarms‎:‎ Provides notification of changing utility power and UPS power conditions
• Disconnected battery notification‎:‎ Warns when a battery is not available to provide backup power‎.‎

• Safety‎-agency approved‎:‎ Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment‎.‎

Technical Specifications

• Output Power Capacity‎:‎ 865 Watts / 1500 VA
• Max Configurable Power‎:‎ 865 Watts / 1500 VA
• Nominal Output Voltage‎:‎ 230V
• Output Frequency ‎(‎sync to mains‎)‎‎:‎ 50/60Hz +/‎- 3 Hz
• Crest Factor‎:‎ 3 ‎:‎ 1
• Topology‎:‎ Line Interactive
• Waveform Type‎:‎ Stepped approximation to a sinewave
• Output Connections‎:‎ ‎(‎5‎)‎ IEC 320 C13 ‎(‎Battery Backup‎)‎‎,‎ ‎(‎5‎)‎ IEC 320 C13 ‎(‎Surge Protection‎)‎‎,‎ ‎(‎2‎)‎ IEC Jumpers ‎(‎Battery Backup‎)‎

• Nominal Input Voltage‎:‎ 230V
• Input Frequency‎:‎ 50/60 Hz +/‎- 3 Hz ‎(‎auto sensing‎)‎
• Input Connections‎:‎ IEC‎-320 C14
• Input voltage range for main operations‎:‎ 176 ‎- 294V
• Input voltage adjustable range for mains operation‎:‎ 156 ‎- 300V
• Input Breaker Capacity‎:‎ 10.0 A

• Battery Type‎:‎ Maintenance‎-free sealed Lead‎-Acid battery with suspended electrolyte ‎:‎ leakproof
• Typical recharge time‎:‎ 8 hour‎(‎s‎)‎
• Replacement Battery‎:‎ APCRBC124‎,‎ APCRBC124J
• RBC™ Quantity‎:‎ 1
• Extended Run Options‎:‎ APC Power‎-Saving Back‎-UPS Pro 1500‎,‎ 230V

• Interface Port‎(‎s‎)‎‎:‎ Optional Simple Signalling RS232 cable‎,‎ USB
• Control panel‎:‎ Multi‎-function LCD status and control console
• Audible Alarm‎:‎ Alarm when on battery ‎:‎ distinctive low battery alarm ‎:‎ overload continuous tone alarm

• Surge energy rating‎:‎ 441 Joules
• Filtering‎:‎ Full time multi‎-pole noise filtering ‎:‎10% of IEEE surge let‎-thgouh ‎:‎ zero clamping response time‎:‎ instantaneous
• Data Line Protection‎:‎ Analog phone line for phone/fax/modem/DSL ‎(‎RJ‎-11 connector‎)‎‎,‎ Network line ‎- 10/100/1000 Base‎-T Ethernet ‎(‎RJ‎-45 connector‎)‎

• Maximum Height‎:‎ 301.00 mm
• Maximum Width‎:‎ 112.00 mm
• Maximum Depth‎:‎ 380.00 mm
• Net Weight‎:‎ 12.70 KG