هواتف محمولة و تابلت
كمبيوتر و برامج
موضة و جمال
كتب و ترفيه
## Description The Allergo AC/DC Current Sensor ACS712 is based on the principle of Hall- effect, which was discovered by Dr. Edwin Hall in 1879. According to this principle, w... المزيد عند تك ديبوت مصراشتريه من تك ديبوت مصر
## Description The Allergo AC/DC Current Sensor ACS712 is based on the principle of Hall- effect, which was discovered by Dr. Edwin Hall in 1879. According to this principle, w... المزيد عند تك ديبوت مصر
The Allergo AC/DC Current Sensor ACS712 is based on the principle of Hall-effect, which was discovered by Dr. Edwin Hall in 1879. According to this principle, when a current carrying conductor is placed into a magnetic filed, a voltage is generated across its edges perpendicular to the directions of both the current and the magnetic field.
The output of theAC/DC Current Sensor ACS712 has positive slope when an increasing current flows through the copper conduction path (from pins 1 and 2, to pins 3 and 4). The ACS712 device comes in three variants, providing current range of±5A (ACS712-05B), ±20A (ACS712-20B), and ±30A (ACS712-30A). The ACS712-05B can measure current up to ±5A and provides output sensitivity of 185mV/A (at +5V power supply), which means for every 1A increase in the current through the conduction terminals in positive direction, the output voltage also rises by 185 mV. The sensitivities of 20A and 30A versions are 100 mV/A and 66 mV/A, respectively.
At zero current, the output voltage of the AC/DC Current Sensor ACS712 is half of the supply voltage (Vcc/2). It should be noted that the AC/DC Current Sensor ACS712 provides ratiometric output, which means the zero current output and the device sensitivity are both proportional to the supply voltage, VCC. This feature is particularly useful when using the AC/DC Current Sensor ACS712 with an analog-to-digital converter. The precision of any A/D conversion depends upon the stability of the reference voltage used in the ADC operation.
In most microcontroller circuits, the reference voltage for A/D conversion is the supply voltage itself. So, if the supply voltage is not stable, the ADC measurements may not be precise and accurate. However, if the reference voltage of ADC is same as the supply voltage of ACS712, then the ratiometric output of ACS712 will compensate for any error in the A/D conversion due to the fluctuation in the reference voltage.
عليك القيام بتسجيل الدخول