WAC6303D-S 802.11ac Wave2 3x3 Smart Antenna Access Point with BLE Beacon (no PSU)
Top wireless service and real flexibility in high-traffic places The WAC6303D-S access point is equipped with an intelligent antenna, which provides clients with top wireless services even in places with high traffic. In addition, the WAC6303D-S supports the NebulaFlexTM Pro solution, which includes a three-year Professional Pack license and allows for three operating modes (stand-alone, controller-driven, and cloud-driven Nebula).
Technical parameters
802.11n/ac premium features:
- 2.4GHz: 2x2 MIMO with two spatial stream (SU-MIMO)
- 5GHz: 3x3 MIMO with three spatial stream (SU-, or MU-MIMO)
- 802.11ac beamforming (transmit beamforming)
- Maximal ratio combining (MRC)
- Low End Sensitivity Improvements (LESI)
- Time Domain Channel Smoothing
- 20-, 40- and 80-MHz channels
- PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
- Maximum Likelihood Demodulation (MLD) support
- Low Density Parity Check (LDPC) support
Typical transmit output power (dBm):
- US (FCC) 2.4 GHz: 25 dBm
- US (FCC) 5 G GHz: 28 dBm
- EU (ETSI) 2.4 GHz: 20 dBm
- EU (ETSI) 5 G GHz: 26 dBm
Antenna gain:
- 2.4 GHz: 3 dBi; 2x2 MIMO
- 5 GHz: 4 dBi 3x3 MIMO
Support data rate:
- 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
- 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI = 400ns)
- 802.11ac: up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI = 400ns)
Receive sensitivity: Min. Rx sensitivity up to -103 dBm Number of 10/100/1000M LAN: 2 x switch ports Console port: 4-Pin serial Input power requirements: Direct DC power or Power over Ethernet (PoE) * 2 PoE:
- 802.3at (full mode)
- 802.3af (Restrict 2.4G & 5G radio to one transmit stream only.)
PoE power draw: 16.2W (802.3at PoE) Item:
- Dimensions (WxDxH) (mm/in.): 211 x 223 x 39/8.31 x 8.78 x 1.54
- Weight (kg/lb.): 800/1.76
Included accessories: Wall/ceiling mount plate Plenum rating: Yes Kensington lock support: Yes Power supply:
- Input: AC 100-240V, 50 ~ 60Hz
- Output: DC + 12V 2A (Sold separately)