Tenda TEF1110P-8-63W is a 10-port PoE switch with PoE af/at power supply. 8 10/100 Mbps ports are powered by PoE 802.3af/PoE 802.3at (total 63 W) + 2 ports for Uplink. Overvoltage protection 6 kV. QoS, VLAN and Extend mode up to 250m. Metal cover.

The package includes a Czech, Slovak and Polish manual.

Technical parameters Standards & Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at Ports: 8x 10/100Mbps RJ45 auto-negation, Port1 to Port8 supports IEEE802.3 at/af PoE standard + 2x 10/100Mbps ports for Uplink Cabling for connection of terminal devices: 10BASE-TX: UTP category 5, 5E (? 250m), 100BASE-TX: UTP category 5, 5E (? 150m) Total throughput: 1.6Gbps MAC address table size: 1K Switching mode: Store-And-Forward LED Indication: 10x Line/Activity, 1x Power PoE power supply: Port 1 to Port 8 support standard IEEE802.3at/af power (maximum power for each port is 30W), PoE power type is end-span (1245+, 3678- line pair) Power adapter: DC 51V/1.25A Consumption: 5 W (without PoE power supply), 63 W (with connected PoE devices max. 58W) Dimensions: 177.5mm x 104mm x 26mm (L * W * H) Total max PoE power supply: 58W Working temperature: -10oC ~ 45oC Humidity: 10% -90% RH (non-condensing) Certification: CE, RoHS and more

product description Tenda TEF1110P-8-63W switches data using 10 RJ45 ports, 8 10/100 Mbps ports, supports PoE802.3af/at + 2 10/100 Mbps ports for Uplink. The switch has 6kV overvoltage protection. Store-and-Forward node switching support. 802.3x full-duplex flow control, back-pressure mode half-duplex flow control. Two Uplink ports can be used to connect the switch to the network and the other to connect other devices without PoE, such as NVR and others.

TEF1110P-8-63W is suitable for both small and medium-sized companies and households.

Default/Extend mode switch Tend TEF1110P-8-63W includes a switch to select from two modes: Default mode/Extend mode. - Default mode: In this mode it works as a classic switch, all ports have auto-negation, Port1 to Port8 speed 10/100 Mb/s with PoE, Port9 and Port10 speed 10/100 Mb/s without PoE. - Extend mode: The speed of PoE ports Port1 to Port8 is max. 10 Mb/s, auto-negation active and the range to the terminal device is increased up to 250m (it also depends on the terminal device, cabling, etc.). In this mode, VLANs are active on each PoE port, ie. each of the PoE ports communicates with only the two Uplink ports, not with the other PoE ports.

PoE power options - Power over Ethernet Power ports via PoE 802.3af (15.4W) and 802.3at (30W). Max. a total of 63 Watts on 4 PoE ports, example of use: - 4 ports, each 15.4 W (PoE 802.3af) - 2 ports, each 30 W (PoE 802.3at) - 1 port 30W outdoor IP camera + 1 port 20W Access Point + 1 port 10W indoor IP camera + 1 port 5W IP phone

Always a total of max. 63 W

Package contents 1x Tend TEF1110P-8-63W 1x Quick installation guide (CZ, SK, PL, EN) 1x Power adapter (51V DC, 1250 mA)

More information at www.tenda.cz