Keep your home under control with the iGET SECURITY M5-4G Lite intelligent security system. It is wireless, communicating with your phone via 4G LTE, WiFi and Ethernet. In the event of an Internet failure, it switches to 4G LTE, it can also send SMS messages using GSM. It works with both Android and iOS, you can use it to monitor indoor and outdoor IP cameras, control 230V sockets and more than 20 other types of accessories. The life of the batteries in the accessories is up to 5 years and the range to the alarm is up to 1 km. The alarm also offers connection to the central protection desk, care mode, doorbell function or special smart functions and buttons. The highest communication security is 256 bit and you can adjust the alarm settings remotely from anywhere. The manual and application are completely in English.

iGET SECURITY M5-4G Lite is an ideal intelligent system for the security of all buildings - houses, apartments, cottages, offices, garages, shops, warehouses, offices, etc. It is a wireless alarm with simple installation and control, which will not only secure your house. You can use it remotely or according to a timer to start electrical appliances using controlled sockets, and also monitor the events at any time using IP cameras. In the event of an alarm, the alarm starts recording on this IP camera and shares the video with the application on your mobile phone. All sensors are wireless, most are powered by batteries with a lifespan of up to 5 years, the main unit is powered by a 230 V network (but also has its own backup battery with a lifespan of at least 8 hours). Thanks to this, the object is constantly guarded by a backup battery, even in the event of a power outage. It also has a backup of the Internet connection, when the connection via WiFi or Ethernet cable fails, it automatically switches to the 4G LTE data network, or vice versa. It can also send SMS messages about alarm and alarm status.

Application An application freely available on Google Play and the iOS market is intended for control. The app is completely free all the time. With the help of this application, it is possible to carry out clearly complete settings, add sensors, control IP cameras, controlled sockets, etc. The application is available in Czech, Slovak, Polish, Hungarian, English and many other languages. One application thus combines the setting and control of the alarm, IP cameras, smart buttons and controlled sockets, all-in-one. The application also supports a special alert for the iOS platform - Critical alerts.

Wireless transmission and security The sensors are connected to the main unit via wireless transmission with a range of up to 1 km. This wireless transmission takes place at a frequency of 868.35 MHz and stands out with the world strongest MD5 + SHA256 security. This special 256-bit algorithm has not yet been broken in the world. Despite this special security and the enormous range of the sensors to the main unit, the sensors have a battery life of up to 5 years. Furthermore, the alarm communicates to the Internet via special secure European Google servers with GDPR support, which creates a connection between the alarm and the mobile phone. In addition, the M5-4G supports Bluetooth connectivity, which greatly simplifies the initial setup of the head unit.

How the alarm communicates with the app/phone The iGET SECURITY M5-4G alarm is connected to the Internet and automatically communicates with the server. Connecting the M5-4G to the Internet is necessary and can be implemented using a WiFi connection (the alarm includes WiFi 802.11 b/g/n 150 Mb/s), using an Ethernet cable with an RJ45 connector (speed 10/100 Mb/s), and also using 4G LTE mobile data transmission. The user mobile phone must be connected to the Internet using a data connection or WiFi in order for the alarm to communicate with the mobile phone. The alarm also supports sending SMS messages using a basic GSM connection. Wireless IP cameras are directly connected to your home WiFi network with an Internet connection just like the M5-4G alarm.

Connection to the PCO central protection desk The iGET SECURITY M5-4G alarm also supports connection to the central protection desk - PCO. Thanks to this, it is possible to connect the alarm to the security agencies that guard your property. Specifically, it supports PCO type CMS Contact ID, SIA-09.

Multi-user accounts The iGET SECURITY M5-4G alarm contains 3 levels of user accounts. The highest is "Administrator", he performs all settings and controls. Next is the "User" - he can control the alarm, but does not make settings (activate/deactivate/home mode/SOS, view online video from cameras, control the outlet, etc.). The lowest level is "Guest", he can only control these modes: activate/ deactivate/ home mode/ SOS.

Quickly share settings and create an account If the administrator wants to add more users, it is very easy. Just install the "iGET M5" application on another mobile phone. Then display the QR code for sharing on the first phone and use the second phone to scan in the app. This completes the pairing.

A large portfolio of other accessories and controls All accessories compatible with the iGET SECURITY M5-4G alarm are labeled iGET SECURITY EPxx (xx stands for numbers 01 to 99). There is no need to pull wires or make complex adjustments to connect the sensors to the central unit. The sensors are wireless and most are battery powered, adding them to the system is a matter of minutes. The sensors have a range of up to 1 km to the main unit. Just insert the batteries, scan the code on the sensor with your phone and place it in the space. An unlimited number of additional accessories can be added to the alarm. Activating and deactivating the alarm is also easy and fast, either using a wireless key fob, wireless keyboard, RFID chip or mobile app. The durable key fobs also serve as remote controls for the alarm. With their help, it is possible to activate/deactivate the alarm, activate the SOS alarm or set the Home mode to only certain zones.

"Care" mode It is a special function for taking care of, for example, elderly parents or other household members. The user chooses which sensors and during what period of time they should monitor the activity of the person being cared for in the given object, and if there is no activity at the selected time, the alarm will alert the user with a notification.

"Domestic doorbell" function for homes and shops For in-store use, the user can choose which sensor to respond to. E.g. the door sensor works in such a way that when the contact is disconnected, the alarm starts playing the selected melody (the alarm must be in the Home or Disarmed mode), then in the Active mode this sensor will trigger an alarm. For the home, it is possible to use the EP7 smart button for classic ringing, the alarm can be in all modes. For this function, it is necessary to pair the internal siren EP24 with the system.

Control of controlled sockets 230V The iGET SECURITY M5-4G alarm includes not only security, but also intelligent home management. Using the iGET EP16 remote-controlled sockets for controlling one 230V appliance, it is possible to control, for example, lighting, heating or air conditioning. The socket is connected to a regular mains socket and the selected appliance to it. You can remotely turn it on/off, set a timer or connect to some function. It is possible to measure energy consumption with the iGET SECURITY DP16 socket.

IP cameras It is possible to add wireless FullHD IP cameras iGET SECURITY EP15 (internal rotating with sound), EP18 (external fixed with sound) and EP20 (internal fixed with sound) to the iGET SECURITY M5-4G alarm. It is always possible to connect to these cameras using online data transmission. The cameras are connected via WiFi to a wireless network.

"Ready to Arm" function When switching to Active mode, the main unit checks whether all windows and doors are closed, if not, it notifies you in a notification which windows/doors have remained open. The user can either close them or confirm in the application that they should remain open and the alarm will switch to Active mode. It is also possible to set the function only for some sensors or none.

Possibility of naming sensors and controllers iGET SECURITY M5-4G offers full naming of sensors, controllers and all accessories. It is possible to enter up to 160 characters andThis is certainly more convenient and clearer than having to choose from a preset menu of room names.

Protection against sabotage, disconnection of power supply As soon as the alarm detects a signal that tries to interfere with the band on which the wireless sensors communicate, it immediately raises an alarm. When disconnecting or connecting the main alarm power supply to 230 V, the user is immediately informed via the application. The backup battery in the alarm lasts min. 8 hours.

Dead battery in the sensor At any time, the user can check in the application how many percent of the sensor battery is left and replace it in time. The app will also automatically remind you of low battery status in the sensor so that it can be recharged/replaced in time.

Programmable Smart buttons The alarm also supports special smart buttons that can be assigned a function. The EP7 smart button and the fifth button on the EP5 key ring can be used, for example, to control a socket and light bulb, as a doorbell, etc.

Automatic firmware update in the main unit The main unit automatically checks the availability of the latest firmware on the server, gradually stores it in the cache, and then updates this firmware at the time of greatest calmness. The update is very fast, takes about 1 minute. Thanks to the update, new functions are added, security rules are modified to a higher version, and additional sensors are supported.

Main parameters: - Intelligent wireless security system with Internet connection using 4G LTE/WiFi/Ethernet. - Controls indoor and outdoor IP cameras, switches controlled 230V sockets, and communicates with more than 20 types of wireless accessories, marked as iGET SECURITY EPxx. - Supports the connection of an unlimited number of additional wireless accessories. - The application for overall control and system settings is available for both Android and iOS and is available in English. - "Ready to Arm" function - when the alarm is activated, the main unit checks whether all windows and doors are closed, if not, it writes in the notification that they remained open. - "Home bell" function - the user selects which sensor should respond, e.g. a door sensor, when the contact is disconnected the alarm will start playing the selected melody, the alarm must be in Home or Deactivated mode, in Active mode this sensor will trigger an alarm, it is also possible to use EP7 smart button for this ringtone. - "Caregiving" mode - a special function for caring for, e.g., elderly parents, the user selects which sensors and during what period of time they should monitor the activity of people in the given object, if there is no activity at the selected time, the alarm will be alerted using a notification, it is switched on in the mode Home and Deactivated. - Programmable buttons - the EP5 key ring contains a fifth button to which a function can be assigned, also for the EP7 smart button, e.g. socket and bulb control, as a doorbell, etc. - Time and follow-up functions – it is possible to set many logical Smart functions, e.g. turn off all EP16 sockets when the alarm is activated, or activate the Home mode every day at 22:00, etc. - Secret alarm during an ambush: the user enters a code to turn off the alarm, but this unique code is different from the classic one and activates a silent alarm in the alarm and informs other users about it. - Supports connection to PCO - central protection desk. This surveillance system is used by agencies to protect your active. It exactly supports PCO type CMS Contact ID, SIA-09. - Anti-sabotage protection – as soon as the alarm detects a signal that tries to interfere with the band on which the wireless sensors communicate, it immediately raises an alarm. - Each sensor can be named with its own name. - Activation and deactivation of the alarm takes place using key fobs/keyboard/RFID keys/application. - The main unit automatically downloads and installs the latest firmware updates from the server. - Informs about the status/alarm using application notifications or SMS. - Includes an integrated 100 dB internal siren. - Contains a backup battery, thanks to which the alarm is always fully chargedactive when the main power supply is disconnected (duration min. 8 hours), informs the user about this main power failure via application/SMS. - Contains a shock detector to detect damage to the alarm or accessories. - The alarm shows the status of each accessory in percentage in the application. Informs the user via the app which battery accessory is running low on battery. Battery life up to 5 years. - Range of wireless sensors up to 1000 m, for selected up to 200 m. The sensors are easy to fix in the desired place. The alarm displays the signal range of the accessory. - You can freely monitor what is happening in the home with the additional IP cameras, and the phone will provide you with online video immediately in caseof an alarm. - SIM card size: Micro SIM card.

Package contents 1x M5 – central security unit, provides control of all wireless sensors and the entire system control. It communicates using GSM 4G LTE/WiFi/Ethernet.

1x EP4 – wireless magnetic sensor for securing doors and windows.

1x EP5 – remote control (key fob), for quick control of the alarm, includes an adjustable Smart button.

2x Warning stickers informing about the presence of a security device.

1x power adapter for M5 alarm.

1x UIG – user manual in English

1x RJ45 Ethernet cable.

Other optional accessories

iGET SECURITY EP1 – Wireless PIR motion sensor

iGET SECURITY EP4 – Wireless magnetic sensor for doors, windows

iGET SECURITY EP5 – Remote control (key fob)

iGET SECURITY EP7 – Wireless Smart button

iGET SECURITY EP9 – Wireless water sensor

iGET SECURITY EP10 – Wireless vibration sensor

iGET SECURITY EP11 – Wireless outdoor siren

iGET SECURITY EP13 – Wireless keyboard with RFID reader

iGET SECURITY EP14 – Wireless smoke sensor

iGET SECURITY EP15 – Wireless rotatable indoor Full HD IP camera with sound

iGET SECURITY EP16 – Wireless controlled smart socket 230V

iGET SECURITY EP17 – Wireless PIR motion sensor without detection of animals up to 20 kg

iGET SECURITY EP18 - Wireless outdoor Full HD IP camera with sound

iGET SECURITY EP20 - Wireless indoor Full HD IP camera with sound

iGET SECURITY EP21 - Wireless magnetic sensor for iron doors, windows, gates

iGET SECURITY EP22 - RFID key

iGET SECURITY EP24 - Wireless indoor siren

More information at www.iget.eu