The slim metal USB-C 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMC-GL3A not only connects up to three USB devices to a laptop or computer at the same time , but also adds a gigabit network card that connects your computer to a high-speed network. The metal body of the mouthpiece is made of aluminum and thus provides perfect mechanical protection for frequent carrying. The elegant, finely structured surface prevents unwanted prints. The firmly attached USB cable, 20 cm long, is ideal for users of mobile devices. This compact multi-port hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s . The network card expands the computer with a fast and stable network connection , fills in the missing RJ-45 network connector, or adds another network card. LAN adapter is compatible with speeds of 10/100/1000 Mbit/s and also offers a wide range of functions such as IPv4/IPv6 checksum to reduce CPU load by checksums, crossover detection and autocorrection, support for various modes Wake-on-LAN function, work with VLAN or advanced Power Management features. In modern operating systems from Windows 8.1 onwards, the adapter allows easy automatic installation without the need for an Internet connection. The port replicator is an ideal accessory for ultrabooks with a small number of USB-A ports and without a network card. The hub does not shy away from connecting to phones with a USB-C connector. For example, you connect a flash drive, keyboard, and mouse to your phone or tablet. Some Android phones and tablets, such as the Samsung S9 +, can be connected to the Internet with a network cable thanks to this hub.

Input: • 1x USB 3.2 Gen 1/SuperSpeed USB port, USB-C male connector. • Backward compatible with USB 3.1 Gen 1/USB 3.0/USB 2.0 and USB 1.1. • USB connection connector type C male (male) placed on a firmly attached 20 cm cable.

USB outputs: • 3x SuperSpeed USB port, USB-A female connectors. • Support for transfer speeds of 5,000/480/12/1.5 Mb/s (SuperSpeed/High/Full/Low speed). • The total throughput/transfer rate is given by the used USB 3.2 Gen 1 interface (theoretically 5 Gbit/s). • USB hub can connect several external drives simultaneously.

RJ-45 output: • Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. • Supported Ethernet baud rates of 10/100/1000 Mbps. • Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. • 10/100/1000 Mbps autodetection. • IPv4/IPv6 packet Checksum Offload Engine (COE) support to reduce CPU usage, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum and checksum generation. • TCP Large Send Offload V1 and V2 support. • IEEE 802.1P Layer 2 priority encoding & decoding support. • IEEE 802.1Q VLAN tagging support. • IEEE 802.3az EEE (Energy Efficient Ethernet) support - reduce idle power consumption. • Jumbo frame support. • Support for full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. • Auto MDI/MDIX support - crossover detection and autocorrection eliminates the need for crossover cables. • Hardware Cyclic Redundancy Check (CRC) support to detect transmission errors. • Support for pair swap/polarity/skew correction.

Wake-on-LAN function in various modes: • Support for sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and also Link Change wake-up. • Support for the ECMA-393 proxZzzy® for sleeping hosts standard for managing the network connection of sleeping guests using proxy servers. • RealWoW technology support! allows remote wake-up via the Internet.

Advanced Power Management features: The adapter supports advanced power management to reduce losses during sleep or light network operation. It also supports advanced power saving when disconnecting the Ethernet cable. •Support for Advanced Configuration Power Management Interface (ACPI). • Power Management offload (ARP & NS) support. • Microsoft Always On Always Connected (AOAC) support. • Intel Converged Platform Power Management (CPPM) support. • Link Power Management (LPM) support. • Operating System-directed Power Management (OSPM) support. • IEEE 802.3az EEE (Energy Efficient Ethernet) support.

Other features: • Ability to connect devices on the fly thanks to Hot Plug support. • Full Plug and Play support. • Sleep mode support. • High quality shielded cable guarantees high communication speed and minimal unwanted interference. • Support for USB power (bus power). • Dimensions 90 x 23 x 13 mm. • Weight 38 g (incl. Cable). • USB cable length 20 cm.

Supported operating systems: • MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit versions of Windows supported), Mac OS X 10.4.x and higher, Linux with 2.6.x kernel and higher, Android most versions (ATTENTION - it is necessary to check with the manufacturer of the Android device whether the Ethernet connection option is supported).

Package in a cardboard box with a hole for hanging contains: • SuperSpeed USB-C multi hub with a fixed cable length of 20 cm, • Multilingual manual CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/RU/SWE/BG/CN/TR/ARA.