Feature:1. Solar panel: 3W. 17% of efficiency2. Li-ion battery: 3.7V 4400mAh3. Built-in switch on the inside for power saving during shipment4. LED: 38PCS.SMD28355. Lumen efficiency: 300lm  LED3W6. LED life span:50,000Hrs7. Solar charging time:8Hrs8. Lighting mode: Dark/ Bright. Bright-motion

Feature:1. Solar panel: 3W. 17% of efficiency2. Li-ion battery: 3.7V 4400mAh3. Built-in switch on the inside for power saving during shipment4. LED: 38PCS.SMD28355. Lumen efficiency: 300lm  LED3W6. LED life span:50,000Hrs7. Solar charging time:8Hrs8. Lighting mode: Dark/ Bright. Bright-motion activated sensor for lighting when people walk near the device.9. Auto identification of day or night10. Protection function: Over charging. over discharging. over  current, short circuit11. Li-ion battery life span:500 cycles12. Solar panel life span: 5 yearsOperation Instructions1. Unlock and activate the deviceThe battery is attached inside and locked with screws for safety purpose during shipment. Therefore, users have to use the supplied key pin to click the on/off  button and unlock the battery and lighting system2. How to Install the devicePlease use the supplied Expansion pillar-hinge and screws to mount the device on the pole, wall or anywhere outside you want for lighting   Install below.After installed hang wallboard, hanging lamps and lanterns on the hook behind the wall, yank down, until it is from the horizontal direction not to come out.   3. Charging Via solar panel:Install the device facing the south and make sure the solar panel able to receive good sunlight directly without any shelter or glassNormally it can be fully charged in one day under an ideal bright sunlight4. Night sensor functionIt will auto turn on light in dim mode during the night time or dark area and auto turn off during the daytime or bright area5. Bright light modeWhen anyone walk near about 6-12 meters from the device, it will auto turn on the bright light mode. Warning1. Keep the device away from fire, Water and moist places in order to avoid explosion , leakage, moisture;2. Any severe shock to the charger is not recommended;3. No one except professional technicians should attempt to disassemble the charger in order to avoid damaging the  chargerAdditional Note1. Please fully charged the device before the first use2. If there is no good sunlight in 3 months, the battery may be out of power. So you have to charge it with bright sunlight. When it’s fully charged, please use the supplied key pin to unlock the device and lighting system, otherwise, it will not be able to function anymore.3. If the light blinks, it shows that the power is low. Thus, you have to charge it with the sunlight right away. Otherwise, the device will stop functioning soon.4. If there is no good sunlight or during the winter season, especially at the North countries, it may take longer time to fully charge the device and this is a normal situation for solar products.Packlist:Solar LED lamp x 1pcs