Description:
Car Monitor Specifications:
- High quality and good durability
- With small size, convenient to carry
- High definition
- Support automatically start detection while reserving
- Can connect with reversing camera, DVD, VCD etc.
- With a stand holder which has adhesive sticker at the bottom for sticking it
in the car
- Display black screen on no signal
- Support multi-role display
Screen:
- Size: 4.3 inch TFT LCD
- Resolution: 480 x 272
- Display format: 16 : 9
Power Consumption: 3W
Power Supply: DC 12V ~ 24V
Dimensions: 113 x 70 x 20mm
Car Rear View Camera Specifications:
- Display a reversed camera image on the monitor to duplicate the normal view
seen in a rear view mirror. With the high sensitivity, you can get rid of the
poor rear vision.
- Fit into most vehicle key holes, no other installation needed.
- It's a night vision camera, you can easily get the clear situation in your
back.
- With the waterproof design, there is no need to concern the rainy days.
- Low power consumption and low maintenance.
- Easy to install.
TV System: NTSC
Effective Pixel: 656×492
Sync System: Internal
Scanning System: 2 : 1 Interlace
Resolution: 420 TV lines
Validity pixel: NTSC: 510(H) x 494(V)
Night vision
LED:2 LED
Lens Angle: 170/120
Sensor Area: 4.08 mm *3.12 mm
Video Output: 1.0Vp-p, 75Ohm
S / N Ratio: More than 48 db
Water-proof: IP67 - IP68
Current Consumption: No more 300mA
Power Supply: DC 12V
Operating Temperature: -20C - 75C,RH 95% MAX
Storage Temperature: -40C - 85C,RH 95% MAX
Other Items: Automatic white balance, Agc and BLC
Wireless transmitter and receiver:
Features:
1. It is easy to turn your car camera wireless camera.
2. To help you get rid of the clutter in the environment a long cable car, just
connect the transmitter to the camera and the receiver to the monitor, then you
can get a clear picture on the screen.
3. Convert any rearview camera with a standard RCA connector into a wireless
camera with this universal transmitter and receiver.
4. The transmitter can also provide power to the camera, so you can connect it
directly from the camera to turn it on.
5. Made of high quality and durable material.
6. Cigarette lighters with built-in receiver.
-Convert any reversing camera with a standard phono/RCA connector into a
wireless camera with this universal transmitter and receiver kit.
-Eliminates the need to run a cable the length of the vehicle, just connect the
transmitter at the camera end and the receiver at the monitor end.
-The transmitter also includes a handy pass through for the power so you can
connect it inline with your camera.
-Wireless transmitter with male phono plug and male power plug for supplying
power to the camera.
-Wireless receiver with male phono plug for connection to monitor.
Specifications:
frequency:2370 MHz
output power:100 MBT
Power (DC):12 B
video input:NTSC
Sending and receiving range:0--20 m (open area without interference or
obstruction)
Operating Temperature:-20 °C 80 °C
Receiver Sensitivity:-85dBm
Operating current:DC = 12 B 200 MA
Cable length:1.5 M
Note: this transmitter s for in-car monitor or DVD, NOT for portable GPS
Navigation.
Package including:
1 x car monitor
1 x car camera
1 x wireless transmitter
1 x wireless receiver