Headlight restoration that provides up to 3 times more light. Restoration Kit is easy to use in three simple steps, requires no tools and is the only headlight restoration kit currently available that comes with a finishing UV-resistant clear coat application, designed to preserve lens clarity.

The Headlight Restoration kit uses exclusive technology to restore hazy and sun damaged headlight lenses. This easy-to-use kit provides clarity and durable, long lasting protection in less than 20 minutes. Your headlight lens is an engineered system and needs to be properly restored for best performance.

Hazy, yellowed headlights are an inevitable consequence of weather and wear on plastic headlight lenses that is both unsightly and dangerous, as light output lessens and glare is increased. Restore original clarity and vision to plastic headlight lenses in minutes with the Headlight Restoration Kit. The Restoration Kit is easy to use in three simple steps, requires no experience and is the only headlight restoration kit currently available that comes with a finishing UV-resistant clear agent application, designed to preserve lens clarity.

The headlight Restoration and Cleaning Kit will restores dull and discolored plastic headlight lenses back to their brand new look. Restoration takes only about 20 minutes and is both safe and easy to do. Enjoy improved headlight performance, increased night time illumination, and the cost savings of replacing expensive headlight components.

• One sets of kit includes:

  • One bottle of repair coating: 800g/bottle or 600ml/bottle
  • One atomizing cup                Power adapter
  • Masking tape                       Six pieces of sanding paper
  • Funnel                                Mask
  • Two plastic lids                    Car power supply
  • Two O-rings                        Green polish board

Size:40*35*17CM

Weight: 3 kgs

How to use Permanent Headlight Restoration Kits/Car Headlights Renew Kits/Auto Lights Repair Machine?

1. Clean the surface of the lamp with clean towel, and put 2-3 layers of fine paper on the periphery of the headlamps to prevent the car paint from being wrong polished.

Sandpaper introduction: 150 #-180 #  severe cracks and scratches are used (generally mild yellow or slightly cracked, do not use)  240# Slightly cracked or yellowish to use (slightly cracked or peeling)  320# slightly yellowing or dealing with the sand paper mark left on 240 # (manual polishing can be directly used by 320# manual grinding)  500 # mainly deals with the sandpaper left by 320 #.  800 # mainly deals with the sand paper mark of 500 #. After polishing, it can be directly used for fumigation repair. If you want to fix it better. You can use 1200 # for a simple grind, but remember, you can use 1500 # or 2000 # to fine polish the headlamps, because the polishing is too smooth and the brightness is not high enough.

2. There are two main methods for the polishing of headlamps. One is the grinding of the machine, and the other way is the manual polishing. In this case, we give you a brief introduction to the manual polishing method. When grinding, must use water, rub water while polishing, change the grinding direction for each set of sandpaper! (for example: 180 sandpaper transverse grinding, after polishing and finishing,  240 # sandpaper will be polished vertically, except on the edge, but the edge must be carefully sanded! And so on, the final sandpaper can be 800 # sandpaper, also can use 1200 # sandpaper, with a paper towel dry the water on the surface of the lamp and the watermark, this time the surface of the headlamp is even and smooth, color white, the color is the same, no coarse sand paper printing no interface, this time you can wait for the headlamp to be repaired!)