This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices. **Specifications** * **Rated load:** 10 Kg * **Output**: 1mv / v * **Temperature zero drift**: 0.1% F.S * **Output sensitivity**: ± 0.15mv / v * **Temperature sensitivity**: 0.05% F.S * **Insulation resistance**: ≥ 2000MΩ * **Excitation voltage**: 5-10VDC **Wire Connection** The load cell ... more on Future ElectronicsBuy it from Future Electronics
This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices.
The load cell acts like a bridge, it has 4 colored wires as follows
VCC: Red wire
GND: Black wire
Signal +: Green wire
Signal -: White wire
Installation in Weight Scale
It is recommended to use the load cell with Future Electronics Egyptweight scale analog to digital and amplifier module as shown in photo below. In this case you can connect the weight scale module to your Arduino or Micro-controller through serial pins and record or display your measurements
No reviews exist yet for this product.