Mobiles & Tablets
Computers & Software
Fashion & Beauty
Books & Entertainment
Food & Beverages
The **Ronin-MX 3-Axis Gimbal Stabilizer and Steadimate 15 Kit** from **B&H** offers a professional-level camera stabilization platform with multiple options for operation. T... more on Shutter ShopBuy it from Shutter Shop
The **Ronin-MX 3-Axis Gimbal Stabilizer and Steadimate 15 Kit** from **B&H** offers a professional-level camera stabilization platform with multiple options for operation. T... more on Shutter Shop
|Accessory Power Ports:||2 x 12 V Regulated P-Tap|
|Box Dimensions (LxWxH):||21.0 x 15.4 x 15.0″|
|Assistant Software:||Windows XP or above|
|Control Modes:||Underslung Mode|
|Expandability:||D-Bus receiver supported|
|Processing:||32-Bit DSP Processor|
|Payload Capacity:||15 lb / 6.8 kg|
|Operating Temperature:||5 to 120°F / -15 to 50°C|
|Angular Vibration Range:||± 0.02°|
|Power Requirements:||4S Ronin-M battery|
|Load Weight (Reference Value):||10 lb / 4.5 kg|
|Wired:||1 x USB 2.0|
The Ronin-MX 3-Axis Gimbal Stabilizer and Steadimate 15 Kit from B&H offers a professional-level camera stabilization platform with multiple options for operation. This kit includes both the DJI Ronin-MX 3-Axis Brushless Gimbal Stabilizer and the Steadicam Steadimate 15 Support System. Working together, these two devices allow the operator to shoot freely and unencumbered. The system checks linear and vertical motion, as well as compensating for pan, tilt, and movement along the horizon axes, so all unwanted motion is absorbed and eliminated.
By itself, the Ronin-MX is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. It features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cameras weighing up to 10 pounds.
Adding in the Steadimate 15 Support System adds another layer of stabilization and freedom for movement. The Steadimate 15 system is a classic arm and vest kit with a Steadimate gimbal mount that allows you to attach the Ronin-MX. It incorporates a rotating joint that allows for tilt-axis manipulation while the Ronin-MX is mounted. In addition to more freedom of movement and motion absorption, the Steadimate 15 system reduces arm fatigue by distributing the weight of the gimbal setup over the operator’s torso. Having the weight more evenly distributed allows for the operator to more easily accomplish long takes and complex maneuvers with fewer breaks before or after shots.
The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds. Out of the box it supports two-operator operation, and includes a radio controller (transmitter) for the camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI GO app. An included universal mounting adapter allows it to be adapted for use with jibs, car mounts, and various other types of camera support equipment. There is also a handlebar for handheld use.
Note: The SRW-60G is not permitted for use on aerial platforms
Applying Steadicam‘s camera stabilizer experience to motorized gimbal stabilizers yields the Steadimate 15 Support System. Combining a classic arm and vest kit with the Steadimate gimbal mount allows you to mount a motorized gimbal, such as a Freefly MoVI or DJI Ronin, set up with a camera and ancillary gear weighing up to 15 pounds, and reap the benefits of linear-axis stabilization and better weight distribution. During setup, just remove one of your gimbal stabilizer’s handles and replace it with the Steadimate gimbal mount, which in turn, secures to the Steadicam arm. The Steadimate incorporates a rotating joint which allows for tilt-axis manipulation while mounted. Balancing weights for fine-tuning and all necessary mounting hardware are included.
Product Images Gallery
Please let us know what you think