This product may not be available anymore.
for similar products.
RAM Electronics's Description
This Board is 100% original & MADE BY ARDUINO
Galileo is a microcontroller board based on the Intel® Quark SoC X1000
Application Processor, a 32-bit Intel Pentium-class system on a chip
(datasheet). It’s the first board based on Intel® architecture designed to be
hardware and software pin-compatible with Arduino shields designed for the Uno
R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0
to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all
in the same locations as on the Arduino Uno R3. This is also known as the
Arduino 1.0 pinout.
Galileo is designed to support shields that operate at either 3.3V or 5V.
The core operating voltage of Galileo is 3.3V. However, a jumper on the board
enables voltage translation to 5V at the I/O pins. This provides support for 5V
Uno shields and is the default behavior. By switching the jumper position, the
voltage translation can be disabled to provide 3.3V operation at the I/O pins.
Of course, the Galileo board is also software compatible with the Arduino
Software Development Environment (IDE), which makes usability and introduction
a snap. In addition to Arduino hardware and software compatibility, the Galileo
board has several PC industry standard I/O ports and features to expand native
usage and capabilities beyond the Arduino shield ecosystem. A full sized
mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port,
USB Host port, USB Client port, and 8MByte NOR flash come standard on the board.