EGP In stock
* Output Power Capacity: 1300 Watts / 2000 VA * Max Configurable Power: 1300 Watts / 2000 VA * Nominal Output Voltage: 230V * Output Voltage Distortion: Less than 5% at full load * Output Frequency (sync to mains): 50 Hz * Topology: Line Interactive **Features** * High online efficiency: Reduces utlility costs, generates less heat. * Green mode: Patent-pending ...
more on Jumia
Buy it from Jumia Report Technical Specifications
Jumia's Description Output Power Capacity: 1300 Watts / 2000 VA Max Configurable Power: 1300 Watts / 2000 VA Nominal Output Voltage: 230V Output Voltage Distortion: Less than 5% at full load Output Frequency (sync to mains): 50 Hz Topology: Line Interactive Features High online efficiency: Reduces utlility costs, generates less heat. Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs. Cold-start capable: Provides temporary battery power when the utility power is out. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature. Availability Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging. Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances. Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power. Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification: Warns when a battery is not available to provide backup power. Manageability Network manageable: Provides remote power management of the UPS over the network. Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators: Quickly understand unit and power status with visual indicators. Serial connectivity: Provides management of the UPS via a serial port. USB connectivity: Provides management of the UPS via a USB port (not available on all models). Disconnected battery notification: Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers: Enables a quick recovery from overload events. Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Technical Specifications Output Output Power Capacity: 1300 Watts / 2000 VA Max Configurable Power: 1300 Watts / 2000 VA Nominal Output Voltage: 230V Output Voltage Distortion: Less than 5% at full load Output Frequency (sync to mains): 50 Hz Topology: Line Interactive Waveform Type: Sine wave Output Connections: (6) IEC 320 C13, (1) IEC 320 C19 Input Nominal Input Voltage: 230V Input Frequency: 47 - 63 Hz Input Connections: IEC-320 C20 Input voltage range for main operations: 180 - 287V Input voltage adjustable range for mains operation: 170 - 300V Batteries & Runtime Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time: 3 hour(s) Replacement Battery(Service center technician only): APCRBC133 Replacement Battery: RBC7 RBC™ Quantity: 1 Communications & Management Interface Port(s): USB Control panel: Multi-function LCD status and control console Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays Emergency Power Off (EPO): -- Surge Protection and Filtering Surge energy rating: 300 Joules Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical Maximum Height: 216.00 mm Maximum Width: 170.00 mm Maximum Depth: 440.00 mm Net Weight: 27.50 KG Reviews
No reviews exist yet for this product.