Ubiquiti PowerBeam M2, outdoor, 2.4GHz MIMO, 2x 18dBi, AirMAX
OVERVIEW PowerBeam is based on the former very successful NanoBridge product line. It now includes more powerful hardware and a smarter design. The design has been simplified to the maximum, installation in the field is now faster and more convenient, for the sake of interest I would like to mention the button for releasing the main unit (radiator), which was a problem with the older generation.
Inside the PowerBeam is a powerful Atheros 74KC MIPS processor with a frequency of 560MHz, which is supported by 64MB of DDR2 type operating memory and 8MB of Flash memory. The network port supports 10/100 Ethernet and the unit can be powered via passive PoE 24V/0.5A (active PoE according to 802.3af is not supported). The theoretical maximum throughput of the unit is 300Mbit (MCS15,802.11n, 2x2 MIMO, at a channel width of 40MHz).
InnerFeed™ technology integrates the radio part into the radiator from the antenna, eliminating potential loss on the RF cable.
Package contents:
- device
- PoE power supply
- power cable
- parabola
- mounting kit for attaching to the mast
- plastic part for holding the radiator
TECHNICAL SPECIFICATIONS Wireless frequency [GHz]: 2.4 CPU: MIPS 74KC CPU frequency [MHz]: 560 Max. power consumption [W]: 6 Power supply via PoE: 24V DC Operating mode: Client, Repeater, AP Router, Access Point, Client Router (wisp) Number of LAN ports: 1 Number of built-in antennas: 2 IPv6 support: Transparent (bridge mode) PoE: Input Operating temperature [°C]: -40 to 70 WiFi transmission speed - 2.4GHz [Mb/s]: 300 LAN speeds: (1) 10/100Mbps Encryption: WPA2 AES Buttons: Reset Antenna type: Built-in Operating memory size [MB]: 64 Outdoor use: Yes Default IP address: 192.168.1.20 Default username and password: Ubiquiti/Ubiquiti 2.4GHz transmit power [dBm]: 28 WiFi standards: 802.11b/g/n airMAX: Yes Antenna gain [dBi]: 18 Width [mm]: 400 Height [mm]: 400 Depth [mm]: 289 Weight [g]: 1795