TP-Link CPE510 Outdoor 5GHz 300Mbps

OVERVIEW

• Built-in 13dBi 2x2 dual polarized directional antenna MIMO
• Adjustable transmission power from 0 to 27 dBm/500mW
• System-level optimization for wireless transmission over a distance of more than 15 km
• TP-LINK Pharos MAXtream Time-Division-Multiple-Access (TDMA) technology improves device performance in terms of throughput, capacity and latency, ideal for PTMP applications
• Centralized system of administration - Pharos management
• AP/Client/AP Router/AP Client Router (WISP) operating modes
• The passive PoE adapter supports Ethernet power up to 60 meters and allows remote device reset

SPECIFICATIONS HARDWARE FUNCTIONS Processor

• Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc

Memory

• 64MB DDR2 RAM, 8MB Flash

Interface

• 1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in)
• 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
• 1 Grounding Terminal
• 1 Reset Button

Dimensions (w * d * h)

• 224 x 79 x 60 mm

Antenna type

• Built-in 13dBi 2x2 Dual-polarized Directional Antenna
• Beam Width: 45 ° (H-Plane)/30 ° (E-Plane)
• Note: For more details, please refer to datasheet

Protection

• 15KV ESD Protection
• 6000V Lightning Protection

Consumption

• 13 Watts Max
• Note: When deployed using Passive PoE, the power drawn from the power psu will be higher by some amount depending on the length of the connecting cable.

Power supply

• Passive Power over Ethernet via LAN0 (+ 4.5pins; -7.8pins)
• Voltage range: 16-27VDC

Enclosure

• Outdoor ASA stabilized plastic material
• IPX5 waterproof Certification

WIRELESS NETWORK FUNCTIONS Wireless network standards

• IEEE 802.11a/n (with Pharos MAXtream disabled)

Proprietary Protocol

• TDMA Mode (with Pharos MAXtream enabled)

Wireless Speeds

• Up to 300Mbps (40MHz, Dynamic)
• Up to 144.4Mbps (20MHz, Dynamic)
• Up to 72.2Mbps (10MHz, Dynamic)
• Up to 36.1Mbps (5MHz, Dynamic)

Frequency

• 5.15 ~ 5.85GHz

Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.

Intake sensitivity

• 802.11a:
• 54M: -75dBm, 48M: -76dBm, 36M: -83dBm, 6-24M: -95dBm
• 802.11n:
• MCS15: -73dBm, MCS14: -74dBm, MCS13: -76dBm,
• MCS12: -80dBm, MCS11: -83dBm, MCS10: -88dBm,
• MCS9: -90dBm, MCS8: -93dBm, MCS7: -73dBm,
• MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm,
• MCS3: -83dBm, MCS2: -88dBm, MCS1: -90dBm, MCS0: -93dBm

Transmission Power

• 27dBm/500mw (Adjustable power by 1dBm)
• Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

SOFTWARE FUNCTIONS Wireless Configurations

• Pharos MAXtream TDMA Technology
• 802.11a/n Modes
• Selectable Channel Width: 5/10/20/40MHz
• Automatic Channel Selection
• Transmission Power Control
• Dynamic Frequency Selection (DFS)
• WDS Enable/Disable
• Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
• SSID Broadcast Enable/Disable
• Multi-SSID with VLAN Tagging (AP mode only)
• Distance/ACK Timeout Setting
• Wireless MAC Address Filter
• Wireless Advanced:
• > Beacon Interval/RTS Threshold/Fragmentation
• > Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Management

• Discovery and Remote Management via Pharos Control application
• HTTP/HTTPS Web-based management
• System Log
• SNMP Agent (v2c)
• Ping Watch Dog
• Dynamic DDNS
• SSH Server

System Tools

• Wireless Signal Quality Indicators:
• Signal Strength/Noise/Transmit CCQ/CPU/Memory
• Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
• Spectrum Analyzer
• Speed Test
• Ping
• Traceroute

System-level Optimizations

• Optimized IGMP Snooping/Proxy for multicast applications
• Hardware watch dog

OTHER Certification

• CE, FCC, RoHS, IPX5

Package contents

• Outdoor Wireless CPE
• 24V 1A Passive PoE Adapter
• Pole Mountin