Tenda TEG5310P-8-150W is a 10-port Gigabit PoE switch with PoE af/at. 8x 10/100/1000 Mbps PoE 802.3af/at (total 130 W) + Uplink 1x RJ45 and 1x SFP. Layer L3 routing, STP/RSTP/MSTP, IGMP Snooping V1/V2/V3, VLAN, Static + aging ARP, SNMP, 6kV surge protection, Rackmount

The package includes a Czech, Slovak and Polish manual.

Technical parameters Standards & Protocols: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.1d, IEEE802.1s LED Indication: 1x Link/Act or PoE LED 1x Link/1x Link/Act switching, 1x PoE switching, 1x PoE Max LED, 1x Power LED, 1x SYS LED Ports: 8x 10/100/1000 Base-T Ethernet ports (Data/Power), 1x 10/100/1000 Base-T Ethernet ports (Data), 1x 1000 Base-X SFP ports (Data) Surge protection level: - for ports: 6kV, - for power supply: 6kV, ESD: air: ± 10kV, contact: ± 8kV Switching mode: Store-and-forward Total throughput: 20 Gbps Packet switching: 14.90Mpps Buffer: 12Mb MAC address table size: 16K Jumbo frame 10K PoE power supply per port: AF: 15.4W, AT: 30W Total PoE power supply: 130W Power supply: from mains 100-240V AC 50/60Hz Consumption: 12W (without PoE power supply), with connected PoE devices max. 160W Device dimensions: 294.0mm x 179.6mm x 44mm (L * W * H) Mounting/operating methods: rackmount, wall, desktop Working temperature: 0oC ~ 45oC Humidity: 10% -90% RH (non-condensing) Certification: FCC/CE/RoHS L3 Features: VLAN-based routing, IPv4 static routing adding, Static ARP adding/deleting, ARP aging time configuration PoE power supply management: Supports port PoE configuration and power supply with priority, Supports PoE over-temperature protection, Supports PoE scheduled management, Supports intelligent management and PoE-powered device detection (port status, power assignment and PoE-powered device status) Security features: ARP receiving limit, Unknown MAC address discard, DoS attack defense, 802.1x security authentication, Radius security authentication VLAN: IEEE 802.1Q VLAN, VLAN Layer-3 interfaces, Supports three port modes: Access, Trunk and Hybrid DHCP: DHCP Server, DHCP Relay, DHCP Snooping, Supports Option 82 policy configuration Port aggregation: Static aggregation, LACP dynamic aggregation Spanning tree: IEEE 802.1d STP (Spanning Tree Protocol), IEEE 802.1w RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s MSTP (Multiple Spanning Tree Protocol), Supports edge port, Supports BPDU statistics Multicast: IGMP Snooping V1/V2/V3, Supports port fast leave Port Mirroring: Supports N: 1 port mirroring QoS: SP (Strict Priority), SWRR (Simple Weighted Round Robin), WRR (Weighted Round Robin), Supports 802.1p port trust mode, Supports DSCP port trust mode, Supports a maximum of 8 queue service quality mapping ACL: Supports MAC ACL and IP ACL Loading and upgrade: Supports FTP/TFTP/HTTP upgrade, Supports configuration import and export Management and maintenance: Supports Telnet, Supports SNMP V1/V2/V3, Supports WEB management and maintenance, Supports Ping/Tracert/Connection Detection, CPU Monitoring and memory monitoring, Local visualization management

product description Tenda TEG5310P-8-150W represents a very convenient PoE power supply setting incl. very advanced network functions, controls, protections, restrictions, etc.

Highly efficient data transfer at the L3 layer It supports L3 layer static routing protocols, L3 forwarding for more than 400 terminals, L3 routing and forwarding over network segments and can isolate L2 and L3 layers from each other. Compared to using the L2 switch, it is not necessary to go through the router to transfer data.

Map visualization of IP cameras or APs It supports automatic detection of IP cameras and APs using ONVIF, in addition to automatic generation of network topology.

Intelligent PoE power supply It uses a new built-in power supply and the maximum output power for PoE devices is 130 W. The built-in PSE-chip with intelligent power management function can simultaneously monitor the chip temperature and adjust the PoE power supply according to the time period. The TEG5310P-8-150W automatically activates/deactivates the PoE power supplyterminal equipment during working hours or idle time in order to minimize energy consumption and extend the life of the terminal equipment.

PoE support according to 802.3af (15.4W) and 802.3at (30W) as well as 40W. It is possible to supply eg 8x 15.4W, or 4x 30W, or 3x 40W and combine it differently so that the maximum consumption is 130W. Highly detailed PoE management allows PoE on/off separately for each port, so you can remotely restart/turn on/off each PoE device separately. It also contains settings for how many Watts the switch should allocate to a given port or it is possible to choose automatic. The switch has a graphical representation of PoE load for each port.

Flexible QoS, precise data traffic control The TEG5310P-8-150W supports three QoS scheduling modes (SP, SWRR, WRR) for more accurate traffic control. After enabling QoS, network traffic will be precisely controlled by data priority. It prioritizes critical traffic and reduces the proportion of data traffic that takes up a lot of traffic under limited bandwidth conditions.

L2 and L3 ACL support, for a higher level of security Support for access control based on MAC address or IP address, unsolicited packets are filtered out immediately.

Prevents network attacks Supports IP/MAC/ARP/DoS attack filtering, automatically activate attack protection according to network protection settings.

Package contents 1x Tenda TEG5310P-8-150W 1x Set of brackets "L" for anchoring in a rack 1x Quick installation guide (CZ, SK, PL, EN) 1x Power cable 230V

More information at www.tenda.cz