Swissten USB/USB-C data cable with high-quality textile braiding. Thanks to its length of 0.2 m, it is especially suitable for charging from power banks or laptops. The cable is reinforced and thus carries a larger current (up to 3A) and can also handle fast data transfer of 480 Mb/s. Swissten USB/USB-C data cable with high-quality textile braiding and metal connector covers. Thanks to its length of 0.2 m, it is especially suitable for charging from power banks or laptops. The cable is reinforced and thus carries a larger current (up to 3A) and can also handle fast data transfer of 480 Mb/s. The bending life of the cable is more than 10000 bends. The metal cover of the connector is more resistant to mechanical damage than ordinary plastic covers of the connectors. Technical parameters: ---------------------------------------------------------------------------------------------------------------- Cable thickness - two tinned copper conductors, where each 22 AWG 70/0.01 (this means that each conductor has 70 strands of thin 0.01 mm, (eg the original Apple MD818 cable has 37 strands of 0.08 mm) + TPE (soft plastic) outer jacket - two tinned copper data strands where each 28 AWG-12 + TPE (soft plastic) outer jacket Connector cover - material: anodized aluminum -------------------------------------------------------------------------------------------------------------------------- Anodizing, or anodizing, is a type of chemical-thermal surface treatment of aluminum products (abbreviation ELektrolytická OXidation aluminum). It consists in creating a protective layer of aluminum oxide on the treated surface. This layer does not oxidize any further and thus protects the aluminum itself from oxidation. It is used, for example, in aircraft (and automobile) production, but most often in cases where aluminum is used in the exterior, e.g. for aluminum windows, etc. The advantage is that after the formation of a thin layer, the material is protected against weather influences.