Panel in a 19 "rack integrating 16 gigabit shielded passive POE injectors with a supply range of 24 - 57V.

Universal solution for remote power supply of a large number of active elements with integrated extractor via UTP cabling.

Over-current protection up to 650mA (+/- 15%) on each port, grounding to time.

Three-stage LED signaling of current values on four groups of ports: • 0 - 20mA (no load) • 0 - 400mA (green ice) • Higher than 400mA (red ice)

By adding this walk-through panel to the switchboard, you get a power center that you can easily connect between the existing switch and the patch panel, which already leads to the powered device (IP camera, IP phone, wireless elements, etc.).

Input for power supply via one of two 2.1mm 60V jacks, all 16 ports are always powered simultaneously from both inputs in POE mode according to the selected A/B input:

Mode A: Compatible with active elements with integrated POE injector using 1/2- and 3/6 + pins for power supply (such as IP, cameras, IP phones, CISCO active elements, etc.). Data after all 4 pairs.

Mode B :. Compatible with active elements with integrated POE injector using 4/5 + and 7/8- pins for power supply (such as MIKROTIK, UBIQUITI active elements). Data after all 4 pairs.

The power supply is not part of the delivery, the choice and performance parameters of the power supply must be optimized according to the respective consumption of powered elements and their configuration. Maximum allowed power values at the input to the POE panel: 24V: 250W (10A) 48V: 500W (10A)

Notice: It is not possible to combine the connection of Ubiquiti 100Mbps products requiring a 24V power supply and products requiring a 48V power supply due to the different behavior of the POE port of Ubiquiti devices powered by 24V from eg the behavior of the port for MikroTik products.

Functions and features: • 19 "design • 16 ports with passive PoE support • LED to indicate a working power adapter • Reversible fuse against current fluctuations (OCP protection 650mA) on each port • 2 input power connectors - standard jack 2.1/5.5mm • Input voltage 24-57V, maximum power 120W

Technical Specifications • Input: 24-57V/120W (2x 2.1 60V power jack) • Data: 1/2 & 3/6 & 4/5 & 7/8 • Power: A) 1/2- & 3/6 + B) 4/5 + & 7/8- • Weight: 1.4Kg • Dimensions: 482.6mm × 44.3mm × 52mm • Ethernet: TIA/EIA 568 Cat5E, Cat6E • Standards: passive PoE • Data rate: 10/100/1000Mbps • Connectors: 16x shielded GB RJ-45 • Operating Temperature: 0 ° C ~ 40 ° C • Storage Temperature: -40 ° C ~ + 70 ° C • Operating Humidity: 10% ~ 80% RH • Storage Humidity: 5% ~ 90% RH • Certifications: CE