Get the most out of your home audio system with high quality; oxygenfree; pure bare copper speaker wire from Monoprice! This speaker wire features two conductors made of high purity greater than 99.95% pure ; oxygenfree bare copper. Pure Bare Copper is a superior conductor to the copper clad aluminum CCA conductors used in most other inexpensive speaker wire. CCA is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect the sound. For the wire to have no audible effect; the total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8ohms; may dip to as low as 4ohms at some frequencies; which further reduces the total cable resistance allowed in the wire. Using Pure Bare Copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers. For example; a 16AWG 2conductor Pure Bare Copper speaker wire has a total resistance of 0.803 ohms per 100 feet both directions must be considered . By comparison; a 16AWG 2conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers; a speaker wire run can be no more 0.2ohms total. 20 feet of 16AWG Pure Bare Copper would be 0.1606 ohms; well under the 0.2ohm limit. On the other hand; 20 feet of 16AWG CCA would be 0.2362 ohms; well OVER the 0.2ohm limit. Each conductor is jacketed with colorcoded PVC for easy polarity identification. The entire cable assembly is jacketed in a White; CL2rated PVC material. The CL2 rating indicates that the cable complies with fire safety and insurance requirements; making it safe for use inside the walls of residential class buildings.