DJI Air System for 2.4G Full HD Digital Video Downlink (Part 2) is the aircraft-side transceiver for the Lightbridge system. It's primary function is to relay an HD video feed at up to 1080p30 back to the ground system unit. It can also transmit flight telemetry data for OSD (on-screen display), and is capable of receiving a control signal, such as when using waypoint flying. It works with aircraft that have Lightbridge-enabled flight controllers installed, and which have a gimbal with composite analog and/or HDMI video output. When both HDMI and composite are available, both an analog SD and a digital HD feed can be relayed to the ground end simultaneously for dual monitoring.

This system requires the Lightbridge Ground System, a mobile device that supports the Lightbridge app, and possibly additional hardware, depending on the installation. Please refer to the Lightbridge User Guide for details.

Requires Compatible Flight Control SystemWorks with select DJI multi-rotor (quad, hexa, and octo) flight control systems. Compatible flight controllers included: A2, WooKong-M, Naza-M V2, and Phantom 2

HDMI and AV Video Input with Full HD TransmissionThe air system supports both analog composite and HDMI signals. When using HDMI, resolutions of to 1080p at 30 fps can be transmitted to the ground

Low LatencyThe video link features a latency of approximately 150ms. This makes the system suitable for FPV flying and aerial videography, where real-time feedback is essential

Built-In OSDThe OSD (on screen display) is natively part of the Lightbridge system meaning a separate iOSD module is not required. The OSD supplies telemetry data supplied by the flight computer, including, attitude/relative position, height, distance, horizontal and vertical speed, flight mode, power levels, signal strength, and GPS strength

Anti-Interference TechnologyUp to 8 downlinks can be connected for parallel streaming. Each can work independently without interference as long as proper spacing is maintained between them

Multi-Device OperationA single air system can transmit to multiple ground systems, sending video to multiple screens at once. One ground system will send the control signal while additional ground systems receive the video signal only

Advanced SecurityGuards against third-party interception of the wireless link or loss of control over the aircraft to a third party. Plus encryption can be setup through the Lightbridge app

In the BoxDJI Air System for 2.4G Full HD Digital Video Downlink (Part 2)2 x Air System Paddle Antenna3 x Air System AntennaGimbal CableDBUS CableAir System Power and CAN-Bus CableAV CableHDMI Cable