ARCTIC P12 PWM PST RGB 0dB Semi-passive 120 mm casefan with analog RGB

RGB FOR FULL COLORS The P12 PWM PST RGB 0dB has 12 analogue RGB LEDs in the fan barrel. These can be controlled uniformly and are compatible with the common RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the RGB mainboard connection or via an external controller and synchronized with the illumination of other hardware.

0 dB MODE - ZERO RPM The speed of the P12 PWM PST RGB 0dB can be throttled to a standstill via PWM. This allows for silent operation in IDLE and at the same time guarantees maximum performance when needed.

MAXIMUM SMOOTHNESS, MINIMUM VIBRATION The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST RGB 0dB has rubberized contact surfaces and thus reduces audible vibrations to a minimum.

OPTIMIZED FOR HIGH STATIC PRESSURE The P12 PWM PST RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

HIGH QUALITY PLAIN BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

HIGHLY LEADER Thanks to a combination of alloying/lubricating agents in Germany, the treatment has been reduced within the Lagers and a higher efficiency has been achieved. This warmth is developed on the other side, and several storage facilities and the lifespan of the fan are extended.

General data

Performance Fan Speed: 0 - 2000 rpm Airflow: 48.8 CFM/82.91 m3/h Static Pressure: 1.85 mm H2O Noise Level: 0.3 Sone Operating Ambient Temperature: 0 - 40 ° C

Fan Fan Frame: Standard Control Type: PWM PST Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing

Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 5 V Current/Voltage: 0.11 A/12 V Cable length: 400 mm

Size & Weight Length: 120 mm Width: 120 mm Height: 25mm Weight: 131g