New series of ARCTIC P fans with optimized static pressure. ARCTIC P12 PWM PST CO (black/black) is a 120x120x25mm ventilator with 200-1 800 RPM (PWM controlled) with 0 dB fan mode and 56.3 CFM/95.65 m3/h air transfer. Noise: 0.3 Sone (@ 1 800 RPM)

Electrical Characteristics Typical Voltage: + 12 V DC Start-up Voltage: 3.9 V DC Cable Length: 400 mm Under PST Cable Length: 50mm

P12 PWM PST CO - Pressure-optimized 120 mm Fan with PWM PST for Continuous Operation

Optimized for Static Pressure - During the development of the new P12 PWM PST CO, special focus was placed on a focused airstream and thus a high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST CO is particularly suitable for use on heatsinks and radiators.

More Efficient Technology - The engine is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, allowing the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

For Continuous Operation - The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature affect this bearing much less than a generic sleeve or one ball bearings, making it the perfect choice when reliability is essential.

Maximum Quietness, Minimum Vibration - Even at low speeds the operating sound of the new ARCTIC engine is barely noticeable. Due to sinus-magnetizing, the new motor only generates about 5% of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new engine.

Extended Life Span - A 10 ° C lower engine temperature roughly doubles the life span of a fan. The new ARCTIC engine has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

0 dB Mode - The P12 PWM PST CO is able to switch to silent passive mode when the PWM signal is below 5% due to its new motor. This lets you work with your PC in complete silence without any unwanted noise.

Performance Fan: 120 mm, 200-1 800 RPM (Controlled by PWM), 0 dB fan mode below 5% PWM Air Flow: 56.3 CFM/95.65 m3/h Noise Level: 0.3 Sone (@ 1 800 RPM)

Electrical Characteristics Typical Voltage: + 12 V DC Start-up Voltage: 3.9 V DC Cable Length: 400 mm Under PST Cable Length: 50mm

Voltage Current 12 V DC (Normally) 0.08 A

Connection Motherboard: + 12 V DC PWM control signal 4-pin connector + 4-pin socket