Water transfer film ‎,‎ also called cubic transfer printing‎,‎ is a way to do the printing on the surface that is irregular‎,‎ which overcomes the problem facing offset printing that can not reach the tongued and grooved face‎.‎ Specification‎:‎ Water Operation Temperature‎:‎ 25‎-35‎?‎ Thickness‎:‎ 0.035mm Size‎:‎ 0.5*1m 0.5*2m Pattern‎:‎As Picture Show Features‎:‎ ‎?‎Application range‎:‎ can be applied to the surface of the materails such as hardware‎(‎brass‎,‎iron‎,‎aluminum‎,‎copper‎,‎etc‎.‎‎)‎‎,‎wood‎,‎plastic‎(‎ABS‎,‎PU‎,‎PP‎,‎PE‎,‎PVC‎,‎etc‎.‎‎)‎‎,‎stone‎,‎ceramic‎,‎glass‎,‎etc‎.‎ ‎?‎Applicable industries‎:‎ autos‎,‎ electronic products‎,‎household appliance‎,‎daily arts and crafts‎,‎indoor‎,‎footwear‎,‎sports apparatus‎,‎etc‎.‎ ‎?‎Tensile properties‎,‎ pattern is not easy deformation‎.‎ ‎?‎Environment friendly ‎,‎ it will not bring pollution to the natural environment‎.‎ ‎?‎Not easy to fade‎;‎ waterproof ‎;‎ enduring aesthetic appearance‎.‎ How To Use‎?‎ 1‎.‎Base coating‎:‎ Mix well the paint obtaining the color that you need‎.‎ 2‎.‎Film selections‎:‎ Select printing film that you need‎.‎ 3‎.‎Place film‎:‎ Cut out the fit size‎,‎ place it flatly on water surface‎.‎ 4‎.‎Activation‎:‎ Spray the activator uniformly on the film after placing the film on the water 60‎-90 seconds‎.‎ 5‎.‎Transfer‎:‎ Keep 35 degrees‎,‎ with a fixture alignment film paper uniform downward pressure‎.‎ 6‎.‎Soaking‎:‎ About 30 seconds‎.‎ 7‎.‎Washing‎:‎ Remove the remaining film‎.‎ 8‎.‎Drying‎:‎ Remove the product' surface water‎.‎ Storage ‎:‎ ‎-The film should be covered by plastic when store‎.‎ A heavy / dark trash bag is perfect‎.‎ ‎-Film Storage‎:‎ 18‎-25°C ‎-Optimum Temperature‎:‎ 21.5°C ‎-Humidity‎:‎ 45‎-65% ‎-Do not open until ready to use to prevent contact with the air‎.‎ Water Transfer Printing Film is a Hygroscopic Substance‎.‎ It has the ability of attracting and holding water molecules from the surrounding environment… Do not store near water or in the room where your dip tank is located‎.‎ ‎-Avoid direct sunlight‎.‎