Mini Single-camera DVR Motion Detection Auto Cycle Recording Video AudioItems DescriptionThe product is a super-mini single-camera DVR with the function of motion detection, which can be connected to CCD or CMOS cameras of various appearances in any way. Wire connection is unnecessary, it is simple to connect and convenient to use, and the product has a wide scope of application.Functions:Video recording is available when the picture in shooting changes, the product has the function of pickup, so as to compensate for the defect of non-pickup in ordinary cameras. Time watermark can be set in audio and video files, video files have of function of auto cycle overlay. The product has one channel of video input and one channel of video output. The video input signal and the audio signal in the sound pickup of the product are saved in TF card, and video output can be connected to monitor or DVR real-time monitoring in monitoring center. The product can also be used as a card reader if only the USB wire is connected to a computer. It is unnecessary to buy power supply otherwise, and the power supply of camera can be used.Method of application:Set time folder of TF card: create a “text file” folder in the computer, which is named as “userconfig”, enter years (4 digits), “-”, months (2 digits), “-”, date (2 digits), blank space, hours (2 digits), colon, minute (2 digits), colon and seconds (2 digits), such as 2014-06-01 12:50:30.Put this folder into the formatted TF card, insert the card into the product, then connect and make the DVR powered in the above-mentioned method, the DVR will read the file setting time in the card, and video files will run according to the set time.Notes: it is suggested to make video recording once when the product is connected (so as to allow the DVR reading the file setting time in the card and setting time watermark). Then power off, and insert the card into the DVR for using after the video recording indicator light stops flashing and formatting the TF card (i.e., delete the “userconfig” file in TF card). If the “userconfig” file in TF card has not been deleted, the DVR will read the file setting time in the card each time the DVR is used after the card is pulled out, which results in an incorrect video recording time, unless formatting is made each time the card is pulled out and the time folder is set again. The product does not support hot-plugging of TF card.Specifications:Function of video recordingLocal storage, auto-cycle audio/video recordingMode of video recordingMotion detection video recording. Video recording is available when the picture in shooting changes, video file will take about 30 seconds-3 minutes/folder (subject to whether there is a change in the picture in shooting, in case of change once, the recording is about 30 seconds, in case of successive change, each video recording file is 3 minutes)Resolution of video recording640x480Format of video recordingAVITF cardSupport 32G, 10 hours in successive video recordingPower supply8-15V, power supply of camera can be used, 40-50mA of electric current is consumed by the DVRDimensions50x40x25mmWeight48g  Package Includes1 X KT-402 mini DVR