iTaste
CLK 1280 Battery Kit
The iTaste CLK! 1280 is an advanced starter electronic
cigarette that has all of the convenience of the iTaste CLK! and is built with
a larger long lasting 1280mAh battery.
The iTaste CLK! 1280 utilizes Innokin’s ‘Vape while you
charge’ passthrough technology which means it will never run out of power and
always be ready to vape. The iTaste CLK! 1280 is charged via a micro-usb port
conveniently located beside the comfortable tri-color on/off button and power
level indicator.
This variable voltage mod has a range of 3.5 to 5 volts and
is adjusted in small increments by turning the wheel on the base of the device.
Simply click your desired voltage setting securely into place the iTaste CLK!
1280 will give you the perfect amount of flavor and vapor every time.
Primary
Features:
Battery Level Indicator: The iTaste CLK e cigarette
battery capacity is displayed via green, yellow and red LED lights. When the
iTaste CLK! battery is fully charged the LED light on the firing button will
turn green and power off.
Green = Fully Charged
Yellow = Half Power.
Red = Low Power. Please Charge.
Large battery capacity: The iTaste CLK1280 has a
built-in 1280 mAh polymer Li-Ion rechargeable battery.
ON/OFF battery switch: Press the power
button three times in rapid succession to turn on the iTaste CLK!. Once
the iTaste CLK! is On hold down the power button to activate the atomizer and
vape. When the iTaste CLK! is not in use press the power
button three times in succession to power off the iTaste CLK!
Advanced Personal Vaporizer. Always power off the iTaste CLK! Advanced Personal
Vaporizer when it is not being used, or when it is going to be stored in a
pocket, bag or purse.
Short Circuit/Atomizer Protection: Short
Circuit/Atomizer Protection protects the iTaste CLK! Advanced Personal
Vaporizer against shorted atomizers and will stop the unit from functioning in
unsafe conditions.
Over-Discharge Protection: The iTaste CLK! Advanced
Personal Vaporizer monitors the battery voltage and will automatically power
off when the battery is discharged.
Technical
Specifications:
Variable Voltage: The rotational wheel adjusts voltage
in the following increments: 3.5, 3.8, 4.0, 4.3, 4.5, 4.8, 5.0
The red LED will blink six times and turn off if the
rotational wheel is not in place.
To set your desired voltage turn the rotational wheel to the
left or right until you hear an audible click. When adjusting the voltage with
the rotational wheel always check to ensure the wheel is set to your desired
voltage.