WLXY WL ‎- 2015 Braided Copper Wire Desoldering Wick Tin Absorption Line 2.0mm Width How to use‎:‎1‎.‎ Place the desoldering wick over the solder to be removed‎,‎ then push the heated soldering iron tip onto the desoldering wick‎.‎ The solder will be absorbed‎.‎2‎.‎ Remove the desoldering wick after the solder has been absorbed‎.‎3‎.‎ Cut off the used section of the wick‎.‎4‎.‎ Repeat steps 1‎,‎ 2‎,‎ 3 if the solder is not removed completely‎.‎ Absorbability may differ depending on the type of solder‎.‎Caution‎:‎Do not force the tip against the desoldering wick to avoid injury to yourself or damage to the parts and PCBDo not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB Brand‎:‎ WLXYModel‎:‎ WL‎-2015Material‎:‎ MetalColor‎:‎ CopperyType‎:‎ Hand toolsSpecial features‎:‎ Copper alloy precision woven‎,‎ 2.0mm Width‎,‎ 1.5m Lenth‎,‎ Eco‎-friendly‎,‎ High absorption RateFunction‎:‎ Desoldering wonders and thoroughly‎,‎ for precision circuitsProduct weight‎:‎ 0.0060 kgPackage weight‎:‎ 0.028 kgProduct size ‎(‎L x W x H‎)‎‎:‎ 4.50 x 4.50 x 1.50 cm / 1.77 x 1.77 x 0.59 inchesPackage size ‎(‎L x W x H‎)‎‎:‎ 8.00 x 6.00 x 3.00 cm / 3.15 x 2.36 x 1.18 inchesPackage Contents‎:‎ 1 x Tin Absorption Line