EMAX SKYLINE F3 flight controller Advanced Version

Features‎:‎

1‎.‎ Practical ‎- Easy to access connectors and solder pads‎.‎

2‎.‎ Configurable ‎- Choose to use connectors‎,‎ solder pads or pins‎.‎

3‎.‎ Stackable ‎- Mount to your PDB or OSD‎.‎

4‎.‎ Compact ‎- Only 36x36mm‎.‎

5‎.‎ Professional ‎- Symmetrical‎,‎ Neat and Tidy‎.‎

6‎.‎ 8 Dedicated PWM outputs

7‎.‎ 8 PWM Inputs

8‎.‎ 36 I/O Connections

9‎.‎ 72 MHz Clock Speed

10‎.‎ 3 Hardware Serial Ports

11‎.‎ 64Mb Flash Storage

12‎.‎ The SkylineF3 gives you all the features you need for the heart of your aircraft‎,‎ whether you\'re into FPV racing‎,‎ acrobatic flying or aerial photography it\'s perfect‎.‎

Supports a variety of aircraft‎,‎ tricopters‎,‎ quad copters‎,‎ hexacopters‎,‎ helicopter‎,‎ planes and more‎.‎

13‎.‎ The SkylineF3 runs the open‎-source clean flight flight control ‎(‎FC‎)‎ software which has an ever‎-growing community of friendly developers and users‎.‎ Being open‎-source means that you too can contribute to the system‎.‎

Flight Performance

 The SkylineF3 builds on tried and tested software‎,‎ processor and sensor technology to make your aircraft fly like it\'s on rails‎.‎

No‎-Compromise I/O

 Use all the features all the time‎;‎ e‎.‎g‎.‎ connect your OSD SmartPort SBus GPS LED Strip Battery Monitoring Sonar 8 motors ‎- all at the same time‎.‎

Configurable

 The SkylineF3 runs Cleanflight which can be configured to suit your needs using a cross‎-platform GUI ‎(‎Windows/OSX/Linux‎)‎‎.‎

Tiny and lightweight

The SkylineF3 has a standard 36x36mm form‎-factor with 30.5mm mounting holes and weighs just 6 grams‎.‎

Flight Logging

On‎-board high‎-capacity black box flight log recorder ‎- optimize your tuning and see the results of your setup without guesswork‎.‎

Next‎-Generation CPU

The SkylineF3 has an ARM Cortex‎-M4 72Mhz CPU with Math co‎-processor ‎(‎FPU‎)‎ for efficient flight calculations that gets more done in less time‎.‎ Loop times up to ~2x as fast as previous‎-generation STM32F1 based boards‎.‎

Developer Friendly

 Developer friendly debugging port ‎(‎SWD‎)‎ and boot mode selection‎,‎ unbreakable boot loader‎.‎

One Shot ESC‎.‎ Full support for OneShot ESCs for easy PID tuning and a sharper response‎.‎

Broad RC receiver Support

Supports SBus‎,‎ SumH‎,‎ SumD‎,‎ Spektrum1024/2048‎,‎ XBus‎,‎ PPM‎,‎ PWM receivers‎.‎ No external inverters required ‎(‎built‎-in‎)‎‎.‎

Programmable LED

Dedicated output for programmable LEDs ‎- great for orientation‎,‎ racing and night flying‎.‎

Battery Monitoring

Battery monitoring ports for voltage and current‎.‎

Sonar

Sonar support for precision low‎-altitude hold‎.‎

I2C Port

I2C port always powered‎,‎ perfect for external sensors or always‎-on OLED Screen‎.‎

Buzzer

Specifications‎:‎

The hardware was designed by the lead developer of clean flight to be more capable than the previous‎-generation STM32F1‎-based boards after hearing feedback from the clean flight users‎,‎ contributors and top‎-pilots‎.‎

36x36mm board with 30.5mm mounting holes

Weight‎:‎ 6 grams

Includes Compass and Barometer Sensors

STM32F303 CPU‎,‎ 72Mhz inc FPU

High‎-Capacity Flash ‎(‎Acro and Deluxe‎)‎

MPU6050 accelerometer/gyro

Micro USB socket

2x 8pin JST‎-SH sockets ‎(‎PPM‎,‎ PWM‎,‎ SERIAL RX‎,‎ GPIO‎,‎ ADC‎,‎ 3V‎,‎ 5V‎,‎ GND‎)‎

8x 3pin though‎-holes for pin headers for ESC/Servo connections

2x 4pin though‎-holes for pin headers for 2x serial ports

1x 2pin though‎-holes for pin headers for battery voltage

1x 2pin though‎-holes for pin headers for buzzer

1x 4pin JST‎-SH socket for I2C

1x 4pin JST‎-SH socket for SWD debugging